THX, your conversion is too good. I use only tested parts...
Do you have a video of HYPER in action?

Not yet. It still doesn't run. The motor should of arrived today but it didn't, also need to order a 16t pinion.

Why 16T pinion, will not be too heavy a transfer?

That makes speed around 40mph, optimal for brushless general bashing.

I got the pinion ordered from the lhs. Will be in tomorrow. Gave the motor a test unloaded with a max of about 1/8 throttle. God, it sounds AWESOME! I relocated the MM to behind the motor, and wired up the bec. The way I mounted the bec is a but ghetto, just tie-wrapped it onto the esc power wires. Also, got the front brace mounted, finally. Here's a couple pics:

http://i160.photobucket.com/albums/t...X/IM006171.jpg

http://i160.photobucket.com/albums/t...X/IM006172.jpg

http://i160.photobucket.com/albums/t...X/IM006173.jpg

Looks good man. You will have to post a vid once you get it all done, I never did get to enjoy that sound of the motor. lol

I'll try to make a "motor sound" video today if I can get a hold of the stepdad's camera.

nice! looks tooo plain without the side guards thoug :D

Really? It made mounting the battery a whole lot easier, and the holes came in handy for tie-wrapping wires.

u may find they were put there for a purpose, to keep stuff out! i was told (on the buggy) that if i didnt add them it would be terrible. and would have stuff all in the chassis.

Ugh... the lhs ordered the wrong size pinion. They ordered a 12t when I asked for a 16t. They can have the 16t in by tuesday, but I was hoping to have it ready for this weekend. I made it VERY clear I wanted a 16t...
:oops::whip:

And now, the update you've all been waiting for....
I drove the hyper st! Still got to program it, (no brakes) and realign the tires and such. Here's a couple pics. My it got dirty quickly!
http://i160.photobucket.com/albums/t...X/IM006178.jpg
http://i160.photobucket.com/albums/t...X/IM006179.jpg

Glad to see that motor got some use. It was traded 3 times before it was even slapped in a car... What were the temps and how was the power/runtimes?

My heat gun took a crap, I ran it only for about 15min because I had to pee really bad and had to run up to my house. :tongue: Anyway, it was basically all 1/2 throttle short hill climbs, and a bit of full throttle wheelie attempts. Even with 5k CD oil, I could wheelie! I'd say temps were as follows; motor: 140, ESC: 150, batteries: 95...

i dont think you should run in THAT dusty of a condition withthe 600xl.. with the open vents and all, dust might not be good for it