RC-Monster Forums
Page 14 of 17 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   MMM's are shipping (https://www.rc-monster.com/forum/showthread.php?t=11870)

titan 05.13.2008 12:41 PM
Quote:
Originally Posted by joeling (Post 172194)
MTBikerTim 1
DRIFT_BUGGY 1
Joe Ling 0
Titan 0 (Germany)
I have to wait, too :whistle:


Titan

skellyo 05.13.2008 04:46 PM
Oh boy are they shipping...

I placed a pre-order with Tower back on April 17th when they were listed for $164.99 (got $15 off of that, so $149.99 shipped). Well, I never did cancel the backorder and they apparently have gotten some in stock...at least enough that they are packing mine up to ship right now.

This means by this time next week, I should have 3 MMM's. :gasp:

e-mike 05.13.2008 04:50 PM
3 mmm :gasp:you can sell one off them:lol:im still waiting,, ive placed my order to mike 25/04/2008..

bruce750i 05.13.2008 04:52 PM
Tower billed my account today also. Never been so happy to get a bill. :yes:

DRIFT_BUGGY 05.13.2008 04:58 PM
Quote:
Originally Posted by skellyo (Post 172449)
Oh boy are they shipping...

I placed a pre-order with Tower back on April 17th when they were listed for $164.99 (got $15 off of that, so $149.99 shipped). Well, I never did cancel the backorder and they apparently have gotten some in stock...at least enough that they are packing mine up to ship right now.

This means by this time next week, I should have 3 MMM's. :gasp:
Just put 1 buy-it-now on ebay for $500 and you'll have them paid off

DRIFT_BUGGY 05.13.2008 04:59 PM
Quote:
Originally Posted by bruce750i (Post 172454)
Tower billed my account today also. Never been so happy to get a bill. :yes:
Far out, how to quickly check I cancelled my back order with Tower. Luckly I did or I would have to do alot of explaining to the wife :whistle:

ICUBoy 05.13.2008 05:12 PM
Quote:
Originally Posted by MTBikerTim (Post 172250)
Install it. I ran mine just then and this thing is amazing. Bottom end power is insane and the MMM is so smooth it is incredible. Didn't get to see what the top end is like. The only thing on my truck that I am disappointed with is the steering. The lengthened chassis hasn't done my turn radius any favours.
Phew! I can finally take a deep breath- I bin holding my breath since you first posted that it was in Australia! I hope you have good luck with it- the posts about failures are dis-turb-ing!

DRIFT_BUGGY 05.13.2008 05:17 PM
Quote:
Originally Posted by MTBikerTim (Post 172250)
Install it. I ran mine just then and this thing is amazing. Bottom end power is insane and the MMM is so smooth it is incredible. Didn't get to see what the top end is like. The only thing on my truck that I am disappointed with is the steering. The lengthened chassis hasn't done my turn radius any favours.
Great news. Was this in the Savage? What motor and battery were you using?

tc3_racer_001 05.13.2008 05:41 PM
hey icu, when did you order? any confirmation as of yet or are we in the 2nd batch? (wouldnt mind anyway...)
ryan

DRIFT_BUGGY 05.13.2008 05:43 PM
I thought the 2nd batch has been sent & the 2nd batch comes with 6.5mm bullets. Did yours come with bullets MTBikerTim?

Pdelcast 05.13.2008 05:46 PM
Quote:
Originally Posted by DRIFT_BUGGY (Post 172472)
I thought the 2nd batch has been sent & the 2nd batch comes with 6.5mm bullets. Did yours come with bullets MTBikerTim?
I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick

DRIFT_BUGGY 05.13.2008 05:49 PM
Quote:
Originally Posted by Pdelcast (Post 172474)
I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick

Right-o, thanks Patrick. I ordered bullets anyway, so the bullets don't worry me

skellyo 05.13.2008 05:59 PM
Quote:
Originally Posted by Pdelcast (Post 172474)
I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick
With the 6.5mm SMT connectors, will you be able to use the pick & place machine on those to reduce manual soldering time? I can imagine that it's probably a strange part to try and have placed, especially if you have tight tolerances on the plated through holes.

I'm just curious...the engineer in me wants to know.

Pdelcast 05.13.2008 06:06 PM
Quote:
Originally Posted by skellyo (Post 172478)
With the 6.5mm SMT connectors, will you be able to use the pick & place machine on those to reduce manual soldering time? I can imagine that it's probably a strange part to try and have placed, especially if you have tight tolerances on the plated through holes.

I'm just curious...the engineer in me wants to know.
Good question. :)

They will be placed by hand, after pick and place, but before reflow. :)

DRIFT_BUGGY 05.13.2008 06:16 PM
Well mine is now @ Post Office in AUSTRALIA at 1:04 AM. So should more than likely be in my hands today


All times are GMT -4. The time now is 02:20 PM.
Page 14 of 17 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.