Interesting: asking about a Team Orion motor on a Castle Creations forum.

Oops? Lol

Does anyone have a size of this ESC? Looks pretty big. Can the fan be removed or will that void warranty? Only planning on using it in Losi xxx-4 on 2s lipo but wanting to run a sensor motor.

http://www.bigsquidrc.com/pictures/c...l/mmaxpro1.jpg

I think I saw it written that the fan is designed to be removed. and I also go the impressions that the footprint is about the same as the mamba max.

suicideneil : has first hand experience with topless men...

Arnold has nothing on you Cory!!!!:whistle:

And I prefer a dry rub on my meat.

The fan comes right off. I had to take it off to fit in my rb5 and just never put it back on.
That picture looks pretty much like my sc10. All covered in dirt but working great.

The fan is removeable, but has little clips that are really designed to be removed once just to get the broken fan off. The size is actually a tad smaller than the MM, but a little taller because of the fan.

Courtesy of Glass Doctor:

http://i163.photobucket.com/albums/t...c/IMG_9840.jpg

next to an MMM.

So, does that mean it's ok to start posting pics and observations?

Im waiting for a brian G writeup :)

None better!

lol, waiting for confirmation from the big PDC! :smile:

it looks like 12 ga wire, can anyone confirm that?

Dunno, either 12 or 14g, but I dont believe that will cause current flow issues really, not like the esc is designed for high current stuff anyway, its a HV & low current draw thing more-over.

Looks like 12awg from the picture.