Got my neu 1512 2d in today and hooked it up guess what!!!!! the mm esc is fried it will not arm. Any idea waht I can do with it other than a paper weight to go along with my fried 7xl. I have had this buggy for three months and it has ran for all of 20 minutes before it toasted itself!!!! sorry for all the extra puncuation but this is just a little frustrating. Can I send the esc back to castle to have it fixed?

have you tried the ESC with a regular castle motor?

Got a buddy's esc and all is fine ran the buggy for about 15 minutes with no problems other than seperating a tire from the wheel. I am a little concerned about the temps. Battery true rc 14.8 8000mah lipo 90 degrees, Mamba maxx esc 146.2degrees and neu 1512 2d 120 degrees. I have the novak capacitor on the speed control, but it looks like I need a fan for the esc. The car is geared 14 tooh pinion and 47 tooth spur. Very fast by the way.

The temps don't sound too bad from what I have been reading. Doesn't hurt to put the fan on there though.

Depending on what you are using to read temps, those values could be incorrect. IR temp sensors have an emissivity setting, which compensates for the different rates at which certain materials (Al vs plastic), finishes (bare metal vs anodized vs paint), and color (black vs white) emit heat. If it's too hot to hold for less than 10 seconds, it's too hot IMO...

I am using a duratrax temp guage (ir). I thermaled the controller today after about 22 minutes 0f hard running. I am ordering the fan today.

Guys,

I know it has been a while since I have posted. But my local track is closing....anyone know if there is a track that is not three hours away that will let me run mybrushles buggy? Just bashing around the house isn't much fun. Oh yeah I am in the great state of Texas and Arkansas. I am three hours east of Dallas, and two hours west of Little rock.

any ideas??????

Since I have no replies to this post I guess I will have a really cheap buggy to sell. Hyper 7 neu 1215 2d, rc monster motor mount, rc monster battery tray, mm speed control, and 3 8000 4s true rc lipos. Two sets of tires one set is brand new never installed. pm me if you are interested. I will make it worth your time.

id be interested in the neu motor. that is, if you will ship o/s.

Thanks for the interest but the buggy is sold.