RC-Monster Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   Another Dead MMM (https://www.rc-monster.com/forum/showthread.php?t=13761)

George16 07.24.2008 05:11 PM
Did you guys ever notice this on CC's website?

Quote:
We are experiencing a temporary phone and e-mail outage. We're told that our communications may be interupted until this weekend. We apologize for any inconvenience this has caused!
http://www.castlecreations.com/

I tried calling but nobody is answering the phone.

By the way, did you guys remove all the connectors before sending your ESC for repair?

Arct1k 07.24.2008 05:31 PM
Yes as you won't get them back...

DRIFT_BUGGY 07.24.2008 06:33 PM
Finally a sunny day, hopefully I will be able to take my MMM out today for a run

Cowboy 07.24.2008 07:03 PM
Quote:
Originally Posted by Arct1k (Post 194599)
That does not imply you have a bad MMM it implies you batteries can't take the load - Review your setup as you are stressing your batteries too much and they could puff...
Eagletree data showed no battery problem. I'm confident that my 5000mah
6s Thunder Power V2 extremes are more than capable

blueb8llz 07.24.2008 08:02 PM
for those of you guys with the still working v1 mmm, are you guys planning to replace it with the v2?
mine is still working fine, and im hesitating if i want to or not, just trying to get some ideas why i should or shouldnt. i kinda like how the wires are coming out of the mmm.

DRIFT_BUGGY 07.24.2008 08:11 PM
Quote:
Originally Posted by blueb8llz (Post 194657)
for those of you guys with the still working v1 mmm, are you guys planning to replace it with the v2?
mine is still working fine, and im hesitating if i want to or not, just trying to get some ideas why i should or shouldnt. i kinda like how the wires are coming out of the mmm.
Well i'll have to wait for it to kill itself first. :angel:

e-mike 07.24.2008 09:10 PM
for me.. when the v2 version come out first buy 2 of these:yes: ..and ship to cc my 3 v1 mmm(still running prety hard)for update:party:

DRIFT_BUGGY 07.24.2008 11:20 PM
Quote:
Originally Posted by e-mike (Post 194671)
for me.. when the v2 version come out first buy 2 of these:yes: ..and ship to cc my 3 v1 mmm(still running prety hard)for update:party:
Did CC say they will take back any V1's for the update?

tc3_racer_001 07.25.2008 12:24 AM
yes.... this has been asked literally 100's of times over different forums... AFTER everything has settled down

Sammus 07.25.2008 02:24 AM
Quote:
Originally Posted by Arct1k (Post 194606)
Yes as you won't get them back...
I got a Mamba 25 replaced a while ago and they cut my connectors off and sent them back to me with the new esc.

MTBikerTim 07.25.2008 02:39 AM
Yeah that's what they did with my MMM the first time it was sent back even though it was the same esc that was sent back to me they still took the deans plug off. Probably something to do with testing.

George16 07.25.2008 02:47 AM
Great. I took off the deans and 6.5mm connectors before sending it off this morning.

hoovhartid 07.25.2008 02:52 AM
wish i had known that...

..oh well...you live, you learn

captain harlock 07.25.2008 06:37 AM
Quote:
Originally Posted by George16 (Post 194734)
Great. I took off the deans and 6.5mm connectors before sending it off this morning.
Good decision! :yes:

bl-is-future 07.25.2008 08:40 AM
i would cut them off as well. Worst that can happen that way is they send it back with new plugs or none at all.


All times are GMT -4. The time now is 05:19 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.