Cool! Thanks Mike.

Let me know how to place the order from you and I'll take a set when you get them.:D

I will list them on the site when I get them in...Hows that?

Sounds good to me. Thanks!

Help too
 

I hate to jump in on this thread but I need help as well with the FLM Tranny.
How does it attach to the aluminum chassis?
Can someone snap a pic and show me, because I seem to be missing mounting hardware as well.

My problems seem to keep going and going....

I ordered the Rusty chassis from Mike and it got here WAY faster then I was expecting, anyways, during the rough assembly of the rear (just wanted to see how everything fits) it seems I am screwed again!

Edit - Think I got it to work, the holes were close enough that if I did the top ones first and then bolted the angle braces to the lower chassis, it all worked :D

I included a photo to help on my problem...

http://www.lunardreams.net/skelbow/shocktower.jpg


About getting the tranny onto the chassis... its just an easy bolt on. the Suspension bracket that goes under the tranny, use those same bolts to go through the lower chassis to hold it all together, I'll snap a pic later.

seannix,

There should be little bevel screws that hold the suspension bracket onto the bottom of the tranny (arrows on first pic)

http://www.lunardreams.net/skelbow/chassis5.jpg

and then all you have to do with put the tranny/suspension bracket onto the top of the chassis, and then screw the 6 bolts from the bottom of the chassis into the tranny (arrows on pic below)

http://www.lunardreams.net/skelbow/chassis6.jpg

Got it mostly together, what do you guys think??
http://www.lunardreams.net/skelbow/FLMPede.jpg

i changed how the front shocks mount for better steering. it also uses nitro rustler/stampede knuckles and front hubs.

i also changed the chassis angle braces to straight down to allow for 7cell packs. i also fabricated a silver carbon fiber top plate.

to give you some ideas here is what mine looks like:

http://home.comcast.net/~joostin420/...4/site1375.JPG
http://home.comcast.net/~joostin420/...4/site1376.JPG
http://home.comcast.net/~joostin420/...4/site1378.JPG
http://home.comcast.net/~joostin420/...4/site1379.JPG

justin

That is THE BEST Rustler i have every seen! ncie job!

thanx; it definately has bling factor to it, but honestly i cant wait till this one below is up and running. still needs work, and a few more parts, but custom chassis with 13.75" wheelbase, and Nemisis 12s BL on 12cells:

http://home.comcast.net/~joostin420/...4/site1287.JPG
http://home.comcast.net/~joostin420/...4/site1285.JPG

still havent decided on a body yet, thinking about an 1/8 scale buggy body with a nice wing on the back :D

justin

WOW!! tahts waht i call a rustler. Reminds me of my old nitro rustler! it was all aluminum.