Doesnt the rotor's demag before the windings fry?

i was told they would still be good, i directly shorted the windings with both of these motors , the xl's wires rubbed the chassis till they were bare and shorted it, and the 9L i put too long of motor screws in and it was shorted across the mount.....both dumb mistakes equal HOT esc and hot motor very quick, which shut it all down but i dont think they got hot enough to demag.

i dont have more cans to test either in, but if some one has a spare can they could give them a try...

i can help you i have a am ofna radio with reciever and crystals. i also have some brushed motors. the need brushes and springs but i have about 5 of them. you pay shipping for usps flate rate box and there yours :intello:

airtronics 94737 wires were repaired but it works

1.ofna am radio with reciever and crystals
2.airtronics 94737 servo

you pay usps flate rate shipping its easiest for me to ship usps but will do ups if wanted

- Ofna GTP pipe

Arct1k- the radio will get sent out today. Ill let you know.

New-1 Pair Proline Velocity 6 40 Series Wheels
New-2 Johnson 550 Sized Electric Motors (basically equal to the traxxas titans for e-maxx)
Used-Posi-trac differential for e-maxx shimmed and greased (older 3906 diff ring gear and case)
New-Stock E-maxx tires from 3906 maxx

To anyone that will pay shipping.

A few things:

-Tamiya tl-01 roller w/ tires and steering servo. Just need body, esc, motor and radio. 2 other parts cars go with it (could probably be combined to make another roller).

-crt .5 yellow dish wheels with losi bk bar tires. Tires are worn.

-Nitro parts. Fuel tanks for Muggy, Duratrax raze, and Cen Matrix. Pipe for Cen matrix.

just pay shipping

First to contribute to another member. :party:

Found a few more things aswell...

1) Some micro-t spares.
2) Spare 30cc pipe "bought a better tuned one and its on its way".
3) Micro-t stock charger. "needs plug".

One more thing:

1 Damaged Novak HV Brushed Controller 16.8 volt capable

Can be sent in to Novak for repair/replacement for $45.00

I will send it to anyone for the cost of shipping.

- 9XL with broken rotor...

Consolidated Listing - Thank you all

Arct1k
- 9xl with broken rotor
- 2.2 wheels for a CRT.5 - The ones that don't use hex's...
- 3.5/4mm bullets
- GTP pipe

TakeDown
- A never used 27mhz 2ch radio "Futaba" with receiver.
- Two packages of reusable large zipties.
- A 75mm comp fan
- Some micro-t spares.
- Spare 30cc pipe "bought a better tuned one and its on its way".
- Micro-t stock charger. "needs plug".

Brushlessboy16
- 40 330uf 25v caps
- 75mhz 3ch rx


Rusty XL5
- HPI Nitro rush driveshafts (dog bones)

Trev3813
- hot bodies HR-3 AM 27 Mhz 2 CH Receiver, works great, compact,
- Airtronics 92721 27 2 CH AM Receiver, works good, compact
- Duratrax RX-100 AM 2 CH Receiver, out of a vendetta works good

BenSF
- CRT.5 Nitro parts
- 3 female 6mm connectors
- traxxas 3ch radios and receivers(in varying condition. TXs are okay receivers need new antenna.)

SuicideNeil
- CRT.5 Nitro parts
- 3 female 6mm connectors
- traxxas 3ch radios and receivers(in varying condition. TXs are okay receivers need new antenna.)

Rootor
- micro-t stock tires on yellow wheels
- few different reciver boxes off nitros
-9v 200ma charger/power supply
-stock mlst2 aluminum shocks
-couple sets of losi springs, i know there are 2.6, 2.9, and another rate i idunno

Cheesecake
- airtronics 94737 servo wires were repaired but it works
- ofna am radio with reciever and crystals

TexasSP
- New-1 Pair Proline Velocity 6 40 Series Wheels
- New-2 Johnson 550 Sized Electric Motors (basically equal to the traxxas titans for e-maxx)
- Used-Posi-trac differential for e-maxx shimmed and greased (older 3906 diff ring gear and case)
- New-Stock E-maxx tires from 3906 maxx
- 1 Damaged Novak HV Brushed Controller 16.8 volt capable

Kona
-Tamiya tl-01 roller w/ tires and steering servo. Just need body, esc, motor and radio. 2 other parts cars go with it (could probably be combined to make another roller).
-crt .5 yellow dish wheels with losi bk bar tires. Tires are worn.
-Nitro parts. Fuel tanks for Muggy, Duratrax raze, and Cen Matrix. Pipe for Cen matrix.

Nice list we all got going but we need more. Ill see what else I can dig up.