Originally Posted by lincpimp (Post 246032)

That is the stuff, but what I am using looks to be thicker than .093... It is great stuff and really easy to work with.

Originally Posted by rchippie (Post 246100)

James your truck looks nice . If that is the plastic you got from me it is in the .120 -.125 range . This site below is lst's muggy's & after shock's only .

http://hdrcvideos.com/forums/index.php

Originally Posted by Takedown (Post 246110)

James, One helluva nice truck you got their. I'd be happy if My LST2 turned out half as nice as that.:yes:

Originally Posted by TwzteD (Post 246134)

would you sell your original mount?

Originally Posted by rchippie (Post 246155)

If you need more just let me know . Did you see my link to the lst forum in my post above ?. Also did you do the gear flip in the tranny ?.

Originally Posted by TwzteD (Post 246175)

Alright, But Can You Post A Pic So I Have An Idea?

Originally Posted by Takedown (Post 246177)

Damn you james.:lol:

Originally Posted by lincpimp (Post 246184)

Yep. I did the gear swap. Worst part was that the small screw holing the bevel gear on the idler shaft was tighter than a dick's hat. Had to file the sides flat (it was a button head) and clamp it in the vise to get it out. After that the case has to be slightly modded, about 30 seconds with the dremel. Not a huge gearing difference, but enough to help the limited spur selection for the lst.

I may have to hit you up for some kydex, but i have a few sheets left. I actually used one to make the chassis for my 2.2 crawler, and all of my buddies use the scraps to make mount brakets and such for their trucks. You kydex is all over Slidel!!!



No prob, I will search it out and snal a few pics. Just used a piece of 2x3 6061 angle and trimmed it to fit. It adjusts using the stock slotted holes on the chassis, which can be a paint in the ass to set the mesh. But it held the hacker motor fine, maybe a touch of up and down flex at the un-supported end of the motor.



Yeah, yeah, yeah, whatchya gonna do to me, huh?:rules:

Originally Posted by rchippie (Post 246189)

I has a similar problem with that screw on my lst2 :lol:. Did you get the BAC drag link for the steering ?. I have thicker kydek if you need it . But it is cream in color & not black . I also have very thin kydex in light gray & drak gray if you need some .

Originally Posted by lincpimp (Post 246193)

I have not found a bac link yet, was looking for that and the al bellcranks for the steering. They seem to be the popular way to fix the steering slop (not much in mine), along with the mixture of Ar and losi servo saver parts.

How much thicker is the cream kydex? I may have you send me some of that and the thin stuff, as i am always making something, and it is good to have a variety of materials. Wonder if kydex can be dyed like other plastic?