RC-Monster Forums
Page 2 of 10 1 2 34 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   CORR Trucks - Slash, SCRT10, etc. (https://www.rc-monster.com/forum/forumdisplay.php?f=46)
-   -   Slash 4x4 Thread (https://www.rc-monster.com/forum/showthread.php?t=25761)

Bondonutz 02.16.2010 05:39 PM
Quote:
Originally Posted by phatmonk (Post 350207)
I think the Neu 1512 1.5D would be perfect.Especialy since they are on sale on the Neu website.Run it on 4s and look out.Overkill yes.Wont ever run hot though.
Yeah, I have a 1512 3D/1700 I was going to install w/4s but decided it might better suited to my 1/8 buggy. I want to stick w/3s to keep it a little lighter. I just ordered (3) 3s 40C's from Hobby CIty for 48.00 each. Can't beat that !

phatmonk 02.16.2010 06:34 PM
Something to remember is you will need to run atleast a 18t pinion when running a finned can Neu motor.

Bondonutz 02.16.2010 08:20 PM
Quote:
Originally Posted by phatmonk (Post 350218)
Something to remember is you will need to run atleast a 18t pinion when running a finned can Neu motor.
For a proper gear mesh I assume due to extra diameter of finnage ?

phatmonk 02.17.2010 04:57 PM
Thats correct Bondonutz.The fins prevent the use of a smaller pinion.

ravin 02.17.2010 07:30 PM
I'm running a Tekin 4030 1400kv the specs look a tad bigger than the castle 2650 motor and I have run a 14/54 with no problems.

phatmonk 02.17.2010 07:35 PM
Yea thats fine but I have a Neu 1515 in my 4x4 slash and its imposible to move the motor over towards the center with a smaller pinion.18t is the smallest I can use in mine.My Finned Neu motor is 1.73 inches in diameter the Tekin is 1.65 inches

fatkidjoey 02.17.2010 07:42 PM
just got my 4x4 and dieing to put my MMP and a 2200kv in it , what kinda pinon is it ? its not mod 1 right ? and where can i get the 4s batt tie down ? anyone know ?

phatmonk 02.17.2010 07:56 PM
Quote:
Originally Posted by fatkidjoey (Post 350406)
just got my 4x4 and dieing to put my MMP and a 2200kv in it , what kinda pinon is it ? its not mod 1 right ? and where can i get the 4s batt tie down ? anyone know ?
The pinion is 32p/.8 pitch 5mm bore for a CC 2200.RCM has them forsale.I had a extra from my E Revo I am using on my Neu 1515 1.5D/F

erevo15151y 02.17.2010 08:34 PM
Hey guys i run a neu1512 1.5d/f in a 1/8 scale buggy,and have a spare motor and mamba monster and a mamba max pro,just got a 4x4 slash,you guys say the neu 1512 1.5 d/f is a direct fit in a 4x4 slash???? If so do i need a special pinion??? Would i need a metal spur?? God i couldnt imagine a slash,my buggy is stupid fast on 4s,,thanks for the help,,ill try to work on it tonight,

Bondonutz 02.17.2010 08:42 PM
Quote:
Originally Posted by erevo15151y (Post 350417)
Hey guys i run a neu1512 1.5d/f in a 1/8 scale buggy,and have a spare motor and mamba monster and a mamba max pro,just got a 4x4 slash,you guys say the neu 1512 1.5 d/f is a direct fit in a 4x4 slash???? If so do i need a special pinion??? Would i need a metal spur?? God i couldnt imagine a slash,my buggy is stupid fast on 4s,,thanks for the help,,ill try to work on it tonight,
Should bolt right up to the motor plate, you'll need a 5mm bore mod.8/32 pitch pinion of course.
Gear accordingly;
http://scriptasylum.com/rc_speed/_top_speed.html

Bondonutz 02.17.2010 08:44 PM
Quote:
Originally Posted by ravin (Post 350135)
My slash
Tekin 4030 2y 1400 kv
MMP
6s 2550 40c Rhino
it weighs 4 oz more than stockhttp://i726.photobucket.com/albums/w...n_2009/005.jpg
WHAT RX BOX do you have installed Please ????

ravin 02.17.2010 09:19 PM
Quote:
Originally Posted by Bondonutz (Post 350419)
WHAT RX BOX do you have installed Please ????
It's the stock RX box.

Bondonutz 02.17.2010 09:54 PM
Quote:
Originally Posted by ravin (Post 350425)
It's the stock RX box.
SHIT, I'm sorry. I hadn't realized it was the stocker. The picture played a trick on my feeble brain, I read you installed a MMP but my eyes seen MMM.
I'm just a big fat dope :whistle:

ravin 02.17.2010 10:00 PM
Quote:
Originally Posted by Bondonutz (Post 350435)
SHIT, I'm sorry. I hadn't realized it was the stocker. The picture played a trick on my feeble brain, I read you installed a MMP but my eyes seen MMM.
I'm just a big fat dope :whistle:
LOL..I'm having issues also,I thought phatmonk was talking about a neu/CASTLE 1515...shit happens.

pinkpanda3310 02.17.2010 10:09 PM
Quote:
Originally Posted by Bondonutz (Post 350435)
SHIT, I'm sorry. I hadn't realized it was the stocker. The picture played a trick on my feeble brain, I read you installed a MMP but my eyes seen MMM.
I'm just a big fat dope :whistle:
Did you want to know about the rx box or the esc?:na:


All times are GMT -4. The time now is 12:49 AM.
Page 2 of 10 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.