RC-Monster Forums - Castle Mamba Monster issue

Page 2 of 2

Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)

- - Castle Mamba Monster issue (https://www.rc-monster.com/forum/showthread.php?t=30640)

Pdelcast

11.07.2011 09:07 PM

Quote:

Originally Posted by RC-Monster Mike (Post 413708)

punch control is actually a throttle delay(acts as if you moved the throttle more slowly), while torque control actually limits output torque(effectively a current limit). Punch control sucks, while torque control is quite useful IMO. :)

Correct. And I agree too. :yes:

scooterboy

11.14.2011 06:12 PM

What version would you recommend for torque control on a mmm v3?

suicideneil

11.15.2011 08:29 AM

Anything newer than v1.24 should have torque control feature- it's just finding a version which doesn't have the low-speed glitching issue ( just don't use v1.28 as that is a known dodgy version ).

brijar

11.15.2011 02:34 PM

How do you tell what version of MMM you have? I think mine is an older version because it has female bullet plugs soldered to the board instead of wires and because the newer firmwares cause heavy low speed glitching. Is there any firmware version with torque control that works with an older MMM? Or do I just have to go do trial and error?

suicideneil

11.16.2011 09:46 AM

Sounds like a v2 or an early v3:

http://traxxas.com/forums/showthread...00022-Firmware

post 28.

Trial and error is the only real approach to take when testing firmware versions, it is purely hit & miss whether the same version works perfectly on 2 escs..

All times are GMT -4. The time now is 01:52 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page