I am not to familiar with trying to straighten a chassis but it would be worth a shot.
How bad is it bent? If possible could you send me a couple pics?

Where about's north of Milwaukee?
I live around the Manitowoc area, about an hourish north of Milwaukee.

I could just meet you somewhere to pick it up as well,
I may also be heading down to Lake Geneva here shortly anyhow so i could pick it up on the way down to...

If he doesn't want that chassis ill take it!

Some Muggy love.
Pics of my shelf queen to tide the thread over till i get some more of my parts that i ordered...


http://i1223.photobucket.com/albums/...n/DSC04058.jpg

http://i1223.photobucket.com/albums/...n/DSC04059.jpg

http://i1223.photobucket.com/albums/...n/DSC04060.jpg

http://i1223.photobucket.com/albums/...n/DSC04061.jpg

so shiney and clean

Have you ever even driven this thing?

Nope, Everything is brand new.
This is my Shelf Queen...

But its no fun to just look at it on the shelf!

Its to nice to get it dirty. :tongue:

It is so hard to not run them though.
I guess easier if got another one just like it though.
Don't forget to wax it every once in a while.

I wash and wax enough things the way it is:lol: from Cars to Sub Cabinets to Collector pool cues. It probably don't help i am a detailer by trade...

Lot easier if you have another one, That's why i had to buy a second to keep thoughts of running the first at bay...

I'm a boater and I laugh derisively at any motor that maxes out at 30k RPM "ah aha ahaha aha", even my submerged drive mini ECO boat spins at over 35k.

An addition has shown up last night:yipi:

Now i can start mocking everything up using an existing chassis and see how i want things to go for now.

I am eventually going to do an innovative chassis, and the 4092 which i am set on now...

Some plans came to a abrupt hault for a short time as my car has decided it was easier to short out its ignition distribution system and a couple relays attached to it instead of distributing its electrical power to my Command center and heating system...:grrrrrr:

:yipi::yipi::yipi:I got most everything Cleaned installed and mocked up, I have a few other things to do.

1 I have to figure out what to do for a batt tray if i want to possible fab one up or buy one from somewhere.

2 Servo setup i have to finish, I also want to switch out most of the turnbuckles and a few other things with the steering components.
Have to search on what to use for that.

3 look at different rods for bracing setup as i would like to use four rod style braces.
Have to search on what i can use there as well, I seen it somewhere around here...

4 Find me a mod one pinion, try to narrow it down to 3 pinions prefer 2 if i decide to ever run 4s lipo

5 I currently weight in at 9lbs with a MMM 2200kv With no E.S.C. and a couple missing parts and Batts.
I just want to find some carbon fiber pieces to possible lighten it up a hair.

I think that pretty much takes care of most everything
if there is anything else anyone can think of please feel free to let me know, Or if there is a better way on doing something...
[IMG]http://i1223.photobucket.com/albums/...h_DSC04107.jpg[/IMG]
[IMG]http://i1223.photobucket.com/albums/...h_DSC04108.jpg[/IMG]

For now i present to you more pics...
http://s1223.photobucket.com/albums/...uggy%20Roller/

Looks good! I had the 4 link chassis brace setup but i didnt like it. The plastic ends kept popping off and i felt that it didn't provide too much bracing either.

That's what i was kind of worried about,
But that can always be changed by grabbing some longer threaded rod and throw on some closed ends...

I wasn't sure of much else for a brace that could be made to look factory.
The Angle piece would do it, but it would take away from a clean look in my opinion.

My mockup should be finished in a few days besides screwing everything together.
I can then look at the setup to see what i could do for a brace, as i could incorporate the brace on one of the Innovative or Losi hd chassis's if i feel the need to.

I am always open for ideas