RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   New Setup (https://www.rc-monster.com/forum/showthread.php?t=32286)

MonsterMaxx 06.09.2016 09:58 AM

pretty cool looking.

try putting a gyro on steering, it'll help a lot

jcflyer 06.09.2016 10:02 AM

Some of the guys I run with have them on their cars, I like to drive mine. I may try one in the future so far I haven't needed it.

MonsterMaxx 06.09.2016 04:36 PM

It's the perfect application for one.
They don't work so well when it's flying a lot off jumps, but on the ground you will be really surprised what a heli tail gyro will do for steering.
With you being into drag racing it could make all the difference on a run keeping that handful going straight

jcflyer 06.09.2016 04:53 PM

As I said ealier some of the guys i run with use them on their 4wd cars that go 70 mph, I prefer to drive it than use the gyro. If it gets to the point where I can't drive it I will then give it a try but, so far I have been able to dive it pretty easy. Huge rear tires help enormously in keeping it straight!!!

jcflyer 10.15.2017 10:26 AM

I thought I would update this thread. I been running my drag buggy for a year now and have tried all kinds of things. So Now I am running a 2028 800kv motor with mgm 25063 esc and 10s packs. I ran 12s for a year decided it was way too much power, tried 8s and just was a tad slower than I liked. So now I am at 10s and it seems to be perfect for 132'. Right now my gearing is 19/54 I want to try 16/54 or 16/57 can you tell me what kind of results I should see with this change???

jc


All times are GMT -4. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.