RC-Monster Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   2280, E-Maxx.. Any helpful Advice? (https://www.rc-monster.com/forum/showthread.php?t=3802)

BrianG 08.12.2006 01:00 AM
Quote:
Originally Posted by squeeforever
Mod1 is a Metric pitch. Like .8 is 32P. A little math and you can find out. I'm pretty sure it comes out to about 24P though.

Edit: I did a little digging and found this converter. It was a PITA to install, but I installed it and if I did it correctly (I think I did since I double checked myself using the .8 to 32P conversion. It came to 31.something) it came out to 25.4P.
Just do a standard-to-metric conversion. There are 25.4mm per inch. So, 0.8mm=0.03149in, or 31.49 pitch. Likewise, 1.0mm=0.03937in, or 39.37 pitch.

coolhandcountry 08.12.2006 07:54 AM
Quote:
Originally Posted by BrianG
Just do a standard-to-metric conversion. There are 25.4mm per inch. So, 0.8mm=0.03149in, or 31.49 pitch. Likewise, 1.0mm=0.03937in, or 39.37 pitch.
Nothing personal brian. But that is not right. According to that it would have finner teeth. Squee has it right. Or close enough to right.
Remember the higher the pitch number the smaller and finner the teeth.

Serum 08.12.2006 08:53 AM
The pitch of MOD1 is 25.4

squeeforever 08.12.2006 09:47 AM
Quote:
Originally Posted by Serum
The pitch of MOD1 is 25.4
Ain't that what I said :p?

Serum 08.12.2006 09:59 AM
you are the best squee.. ;)

aqwut 08.12.2006 10:01 AM
so the mod1 pinions would work with 24 pitch spur fro SDP-SI... cuz this 32 pitch teeth aren't holdn' up.....

Gustav 08.12.2006 10:12 AM
or you could buy a mod1 spur from them instead:032:

aqwut 08.12.2006 11:38 AM
Couldn't find any mod1 spurs Gustav.... Maybe i should try looking at it again....

Gustav 08.12.2006 12:36 PM
Go to the store and click on metric,then gears then spur gears.They seem to have a huge stock there.I ordered from them once but the international shipping was ridiculous.

BrianG 08.12.2006 06:20 PM
Quote:
Originally Posted by coolhandcountry
Nothing personal brian. But that is not right. According to that it would have finner teeth. Squee has it right. Or close enough to right.
Remember the higher the pitch number the smaller and finner the teeth.

Arrg. Sorry about that. I mixed up the dividing. :dft001:

pitch = 25.4 / metric
metric = 25.4 / pitch

So

0.8m=31.75p
1m=25.4p
.53m=48p

coolhandcountry 08.12.2006 07:08 PM
It is ok brian. Just trying to keep you on the right track.

BrianG 08.12.2006 08:55 PM
Quote:
Originally Posted by coolhandcountry
It is ok brian. Just trying to keep you on the right track.
And I thank you. The math makes more sense now too - imagine that. :)

Darren 08.13.2006 11:57 AM
Serum - It was because you called them Home made, although I realise it was a joke now :) .

Mike.L 08.13.2006 12:25 PM
OMG! thats all.


All times are GMT -4. The time now is 08:49 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.