http://www.rc-daily.com/forum/attach...YrM3msLk35.jpg
Finished assembly. Hope have time to test and setup next week.

Nice

Looks great! Now put some lipo in there, a real Brushless setup and it will be a great machine! But im sure it will be pretty good on what your running now, too!

looks beautifull! Really complimenting you budd and Welcome to the fourms!

Very nice! Now, is it faster than the Nitro version? :)

Re:Sylvester
Yes, the setup fit Stick pack Li-Po. After the test with everything ok. Will get them in mass.

Re:Mike L.
Thanks

Re fiero_silva
Don't know yet it will faster than Nitro version or not. I do this project just want to leave those Nitro maintain problem away as I'm not a frequent player. Till that moment I'm still a EP die hard fans. Just a bit worry the run time can't compare with Nitro version. And charging Li-po (especially hi cap.) will require quite sometime.

if you have a good charger anyliop battery would take the same time because your charging at 1C....

Re: Mike.L
at the moment I use Orion Advantage charger.
And peak racing 3200mAH (HKD5XX, approx. USD70)
Any other suggestion? Better the size can fit normal 7.2V stick pack.

Hi guy´s
My E Hellfire iss know nearly ready also and I want to show You soon some Pictures of My Work !
I use only original Part´s and a Outrunner Motor ! the Batteries I use are 8 S Li Fe,rebuild from Elektric Tool Batterie Pack and fit as Saddel Pack - they are fastchargeable but have only 2300 Mah !
I dont know how my system works but i want to try it the next Day´s !
The Weight iss know 4,5 KG !
i Also Use the org. Brake System becaus I don´t want to kill my Flight Controler ( Hacker Master 90 Acro COmp ). The center of gravity is realy low !

Oki, Greet´s Stefan

Nice Erkan! Hows that outrunner working for you? That is a BIG esc!

Nice!

Hi
i don´t know how this Motor will work in the Hellfire ! it has only 700upm per Volt but there is an other avaible with 900 ! I use a 20 tooth Motor Gear so i think it will work !

Stef

I don't think outrunners are well suited for cars. I don't think they are responsive like inrunners. They are made for a rather set RPM, not for a constant variation.

Yea, jhautz said it wasnt the best, he said it felt more like a nitro than a electric.

Very nice work. Should be a blast!!