Artur

What does the folks in here think of this ecs:
http://www.onefive.de/shop/jjeo/produkte/pEO552.htm
Followd up by a lehener 2250/8 with 6s lipo
Will it hold the power enoughe?
How does that sound?

how many volts?
cuz 1480kv is alot.
26 cc engines run only 20k rpm.

the plan was 22.2V

personally i think that wouldnt work, the gasser runs 20k rpm so i think you need a BL motor that runs 20k rpm.:032:
or you need to change the gearing alot.
but with 1/6th your limited to pinions and spurs.:035:

i know

I think i would aim for like a 8s so you won't need as many amps.

Yeah, 6s Lipo might be a little low for voltage. Like CHC said, 8s should work.

Here you go one already for sale (onroad) but will give you some ideas
http://cgi.ebay.com/HARM-EP-1-1-5-Lo...QQcmdZViewItem

The Castle Creations Phoenix-110 High Voltage ESC are thay any god?
Its cheep but are they useable?

Just do a search on phoenix on this forum, and you'll see a few threads about this controller.

It's a nice controller, but you most likely need a stick transmitter, and you need the mechanical brake to stop the monster.