RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   HPI Savage (https://www.rc-monster.com/forum/forumdisplay.php?f=30)
-   -   What is the best motor to put on the e-savage? (https://www.rc-monster.com/forum/showthread.php?t=5831)

Serum 02.24.2007 02:26 PM

45 mph takes a strong drivetrain.

D3nic 02.24.2007 02:32 PM

i will upgrade if it break.. i just want the best motor, plz ;'(

jollyjumper 02.24.2007 03:07 PM

better go 6s then.

D3nic 02.24.2007 03:26 PM

K, that was just my plan with 4s, i havnt buyed annything.. which motor should i choose then, some quali plz..


6s motor, what should i take??

jollyjumper 02.24.2007 03:34 PM

Neu 1512 2.5d (kv=2000)
gets you to 45mph on 6s, might be hot though.

Serum 02.24.2007 04:17 PM

that's way too hot jolly.. 44000 rpm...

4S good cells will get you at 45mph. I am still worried about the drivetrain if it means anything to you..

jollyjumper 02.24.2007 04:19 PM

yes, the e-savage has plastic sliders.:013:

D3nic 02.24.2007 04:36 PM

can put alu shafts on with a little mod.. dont think on that..

Serum 02.24.2007 04:39 PM

diffs?

D3nic 02.25.2007 07:12 AM

e-maxx diff mod :)

Serum 02.25.2007 07:25 AM

the e-maxx diffs are not considered very strong. plus you can't tune them with oil.

4S would be enough to get your e-savage at 45mph. take the motor that brings you at about 30-35000 rpm. If you are looking for a budget system, take a mamba-maxx controller, a Wanderer XL motor and you should be good to go. Though if i recall corectly, the XL cans might be too long.

D3nic 02.25.2007 07:29 AM

im looking for quali.. plz dont think on my drivetrain...

D3nic 02.25.2007 11:08 AM

What about this motor? neu 1512/1.5D

Serum 02.25.2007 11:10 AM

4S would be enough to get your e-savage at 45mph. take the motor that brings you at about 30-35000 rpm.

D3nic 02.25.2007 11:15 AM

45mph is a minimum.. will a 1512/1.5D give enough power for wheelies? will it get to hot?


All times are GMT -4. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.