Well Daniel;

My emaildoor is wide open for you.. ;)

...and so is mine ;)

Compliantguy, what size do you have on the motorshaft? also, would you like to sell a motor mount or is it easy to make one? coild you please take on pic on it..

Thanks
Max

Hi 2evo, welcome to the forum!

Motor mounts can easily be made out of angled aluminium. A drill is all you need, basically.

2evo,

The motor shaft is 5mm. And, I have considered selling the motor mount, battery trays and mounting hardware. PM me and we'll work out something. Also, I have almost 8 feet of the 6063-T5 2" x 2" x 0.1875" aluminum angle, if you need extra material.

woah, thanks! i only want the engine mount, not the battery trays, so how much do you want for one shipped? if needs to be able to fit on a Fiegao 9L if you can.

The way I see it, you can mount any motor to Compliants plate. Well, anything with the popular 540 can, actually. Most motors use the same "footprint".

how did you secure the controller? double-sided tape?

Double sided tape should work. Velcro too.
I always use Velcro plus zip-ties.

whats velcro? i think i'll just use zip-ties^^
well, i cant seem to get a cheap controller(i wont have money to a new one before cristmas, LOL) anyone selling a 9918 or 9920?

Velcro: Don't know the swedish word, but look at the Gorilla Maxx Batterie straps for reference.
http://www.rc-monster.com/proddetail...4-ST-BK&cat=11
You van get this stuff self-adhesive, very handy.

Like I said before, it's hard to find a used Warrior. (you could still sell your .26 and all the nitro junk :p just kiddin')

lol, i just got my .26, havent run 1 gallon yet=P

well, someone gotta have one!

oh, and that velcro, now i know what it is!

oh, the swedish word is kardborr
wierd, ey?

I used self-adhesive heavy duty velcro to attach the speed control. I flipped the truck over several times and the speed control never came loose.

How does $20.00 sound, plus shipping? Where would I be shipping the motor mount to?

2evo, with compliant's kit you would not even need a spare chassis-plate, if you want to switch from BL to nitro and back again. Correct, Compliantguy? I think you haven't done other mods to your chassis but a hole or two, right?