Well then you know what you have to do :eek: .

I'd rather just get a good job than die pennyless and insane trying to play a phonograph record with a peanut.

:L:

LOL!

With the sharp point on the peanut you need to play some music, it might wear pretty quick..

but it would be doable for at least one song.. So play the tune you like.. and get 8 peanuts to play the entire album..

HIT ME! i've got this philosophical moment.. where is Daniel when you need him...

Let's get drunk, naked and dance on the table from the tune the peanutrecordplayer is playing...

LMAO, that is a good joke, i havent heard one that good in a while.

Then the peanuts break down into this useless peanut paste that nobody could possibly want.

I love peanuts, they are tastey:)

http://www.foodmuseum.com/images/peanut1.jpg
^^^ one HAPPY peanut

LOL.

By the way, is that your peanut?

no, my peanuts contain more hair..

And besides, i am more of a Tonka-dude..

LOL, i didnt mean those peanuts:p That peanut is very slick:p

Got the short TI shock towers on my one E-maxx(not G-maxx) and they look great. Have not had a chance to run the truck yet its COLD and wet here.

Thank you,
Promod

Can you say DUH!!!

Hopefully when the weather clears up and I get healthy I can take it out. I'll install the wing later today if I'm feeling better and take some pics. Right know its on the e-maxx because I'm wating on a few things for the t-maxx. Either way they look great!!

http://www.rcbros.com/reviews/duh/review003.jpg

http://www.rcbros.com/reviews/duh/review008.jpg

http://www.rcbros.com/reviews/duh/review010.jpg


The lighting in this house is terrible. There's no way to get a good picture lol. They look alot better in person

I'm tossing my ti bumpers and skids on ebay, man! you could use them!

Nice, rcbros! I hope you get better soon.

This is one weird setup there: Flextek arms and stuff, but a stock diff AND sliders.... But I guess it's all coming together in the end!?
(btw, I have a Maxx with stock driveline and motors, too :) )

OH and I also have some RRP diffs that need a home

Do you also have CVDs? You could arrange a package deal! LOL

j/k

in the race for a set of CVD's Daniel? i've got this MIP centres..

I would, pass the jam

I hope I get better to. I have some serious finals this week!!


LOL stock diffs and sliders. Here's the story. When my brushless went out I loaned my brother my MIP's. So there 130 miles away. I also have some Tsais CVD's but there also at his house. The diffs cases are stock but I'm running the FLM cups. I have aluminum cases but silly me forgot to locktite one after noon and the cases decided to have a inside milling job done :L:

BTW the front and rear ends normally belong to the t-maxx lol.

So with the titans stock holds up. and with my 2.5R they hold up to. I just need to go to my brothers and get my stuff back lol.


well after a nap I had some energy so I got the wing installed. The wing is alittle bent out of shape. But I plan to bash the towers so I will eventually remove the wing. I've bent every shock tower I've had on my maxx's let see how this one stands up.

http://www.rcbros.com/reviews/duh/review016.jpg

http://www.rcbros.com/reviews/duh/review017.jpg

http://www.rcbros.com/reviews/duh/review018.jpg

Yes, actually I do have CVDs!! I've got the sweet RDL 6pc kit!!!

4 billet knuckles
4 outer CVDs
2 spares
2 spare knuckles
4 billet drive hex
8 proline arms
12 teflon 7075 PBs
HCR rear bulks
tranny w/new Forward only
Full RRP diffs
2 center CVDs
CF brake disc
Lunsford ti rods w/spares

LIKE $300 of gear!!!!!!!!!!!!!!!!

http://www.duhengineering.com/rc/img/DSC02011.jpg

Ahhhh you shouldn't of done that.

http://www.rcbros.com/reviews/rdlogic/rdlogic.jpg

Check out the review http://rcbros.com/show_entry.asp?EntryID=9

They break every which way lol.

Still have the knuckles and 4 cvd's here if interested. There so bad I prefer stock :L:

What :rolleyes: comes with spares :rolleyes:

Came on the truck, thanks for killin my chances of ditchin it :W:

HAHAHA. 007 try ebay someone will eat it up.

It's all up on ebay now.

Dropped the towers to $60....

Still $45 for the Gmaxx....

This might be a dumb question but...What shocks are these?

They are UE shocks.

Yep UE Shocks.

hey guys got some new T-maxx goodies and put the truck together today. I'll get some pictures of the new towers put on my t-maxx tomorrow.

Some new pics

http://www.rcbros.com/gallery/rcbro/rc181.jpg

http://www.rcbros.com/gallery/rcbro/rc183.jpg

http://www.rcbros.com/uploads/images..._of_rc_170.jpg

http://www.rcbros.com/uploads/images.../C88_rc171.jpg
http://www.rcbros.com/uploads/images/rcbro/rc_177.jpg

http://www.rcbros.com/uploads/images/rcbro/rc_170.jpg

Promod, got pics, Bill kinda stold your thunder?

And he's BACK..

last post is allmost half year old in this post.. :p

I don't do RC all year long :)

http://www.unlimitedengineering.com/...1/DSC04680.jpg

Another nice hobby..

thats a nice bike

yes . I would say so my-self:p
nice truck 0700.

Seriously I would really like to see some pics of my shorty towers installed on a full Gmaxx.....what do I have to do?

0700- I'll get some pictures of it on my g-maxx in about 2 weeks. Brother has my truck

send me some for cheap!

kidding btw