30mins on 4000mah!!! So hopefully i will experience a little more run time with my 6s 6500mah batts... will keep you updated as my motor is pushing around a 14lbs pig of a truck haha

Nice pics!!! trugyy looks good... i know what i want to be building eventually....
Also what did you use on teh rear a arms to protect the shafts etc..????

30min with 4000mah.....


Maybe messing around the yard but there's zero chance that'll happen at the track under full chat under "race" conditions. If i had to guess, you'll see 15maybe 20 min max depending on track conditions/setup.

Looks pretty good though. Certainly a big motor.

4S 5000mAh setup gives 12-15min in a truggy geared for 40mph, 6S 3300mAh gives a little more for the same speed (better efficiency), so i expect to have at least 20 min runtimes under race conditions. 30 min is the runtimes of bashing, 45min-1H if I walk with the truggy in the park :lol::lol:

Test in track condition done !
19-20min on hard pushing (ratio 15/46) :yipi:, motor temp after 1 run : 100F :yipi: (ambient temp was 57F).
This motor has a fantastic amount of torque, it can reach its max RPM instantaneously and with 70% punch control its just soooo smooth :D
I even don't want to gear up, the ratio is just perfect for bashing or racing, and gives me the efficiency I wanted since the beginning of this project :D
Guys told me that my chassis was in fact a "prospec" MBX5T :yipi: I suppose its bette then a normal MBX5T ???:yipi:

nice to see your happy with yoursetup... I have just put my 18t pinion adn 47t spur in and loctited everything... hopefully it will be ready for tomorrow. I will get a vid hopefully and temp readings... Im interested to see how the motor fairs in a larger truck... (Bare in mind im only bashing so im not on throttle continouslly

Those are some good times for that big beast... you should post your findings in Talk 1520... good info to have there.

New video and some photos ;)

http://www.youtube.com/watch?v=dF3EU-2BarI

http://img265.imageshack.us/img265/6426/lointain.jpg

http://img175.imageshack.us/img175/5421/garde.jpg

http://img689.imageshack.us/img689/724/kern1.jpg

http://img208.imageshack.us/img208/7609/pelouse1.jpg

Nice jumps, major air Nuz69!

Nice... :yes:

nice...I run the 1520 on 5s and love it in my mbx5t

how would a 1520 go on a 4s in a truggy? would run times be extended? currently running 13 minutes with 4s and 2200kv.

Very little, you should go for 5 or 6S with the 1520 to see a big difference.
Maybe a 1518 1800kV and 4S ? but same you should run it on 5S.
6S 1520 geared for 40mph will give best results I think.