If the stock one goes, ill replace it

Got my micro camera in today, going to do a bench test of it and ill post it up when its done.

Updated video with mini review/unboxing

http://youtu.be/CfbBtsWtQIg

Echoooo**

Well ran it today, put about 11 minutes on the lipo, it was in storage mode and didnt not have all the power. Conditions were soggy and cold, -4 but it was wet outside, slide around a lot but the taped badlands did well, they didnt balloon at all! Here are some pictures, deciding whether or not i should post the video of the run..

http://i157.photobucket.com/albums/t...DSC_0034-1.jpg

ugh, it was clean..

http://i157.photobucket.com/albums/t...DSC_0032-2.jpg

http://i157.photobucket.com/albums/t...DSC_0033-1.jpg


the camera,

http://i157.photobucket.com/albums/t...7/DSC_0035.jpg

how it got dirty, im not sure..

Some video of today

<object width="560" height="315"><param name="movie" value="http://www.youtube.com/v/4AoTwcNBSvQ?version=3&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/4AoTwcNBSvQ?version=3&amp;hl=en_US" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>

Well gave er a good today, had a bunch of radio issues with my receiver, the wire coating cut through the plastic coaxing and was interfering with my reception, so I swapped out rx's to fix it, but then i was getting throttle issues with the one from my 8t, even tho i tested it earlier today and it was working!?

So ended up fixing the muggy receiver 8t's still dosent calibrate gas/brake dunno why (no throttle applied or trimmed, sterring works, motor and esc both work, got power MMM just beeps constant. odd..)

Once i got it working decided to take it out, the spash proofing i did to the MMM worked great, as it didnt fail! Even through the puddles I jumped and the snow It was run through.

Some carnage though, was running 3/4th throttle and slid out, sided a curb

http://i157.photobucket.com/albums/t...DSC_0032-4.jpg


Not as bad as it looks, only seems to be the upper and lower arms, this is the second pair ive been through and today was about 7+C.. So rpm and Lunsford here I come.

Vid isn't to bad,
Damn curbs need to stop moving, then we wouldn't have that problem...
I feel your pain my E-revo glitched out bad before i upgraded to 2.4
and the Erevo found the curb that had been chasing it most of the night...:lol: U&L A-arms both gave up there life in that fight...:cry:

Yea trouble was it wasnt the radio that caused the wreck..