RC-Monster Forums
Page 26 of 32 « First 162425 26 2728 Last »
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   Castle 1717 (https://www.rc-monster.com/forum/showthread.php?t=23891)

Duster_360 03.04.2010 02:02 PM
Disappointing we can't get an answer or info about this at all.......

May unfortunately mean its a long way off if its going to happen at all.

RuthlessLST 03.04.2010 03:18 PM
I would like an update too because this is the next purchase on my list for my LST2 build. I have the entire truck ready including the gearing. Now I just need a motor, ESC and batt. :whistle:

V0RT3X 03.06.2010 10:53 AM
Offshore electrics has a note that they're expecting a new batch on April 10. Hope they come with a 5mm shaft.

Duster_360 03.07.2010 05:20 PM
Quote:
Originally Posted by Urgeoner (Post 352415)
DITTO been a long time waiting:yes:
And I see that Kershaw designs has a 6mm 18t pinion.

And a 20t listed as well......


April??

Pdelcast 03.09.2010 04:31 PM
Quote:
Originally Posted by Duster_360 (Post 353213)
Disappointing we can't get an answer or info about this at all.......

May unfortunately mean its a long way off if its going to happen at all.
No, I just didn't want to comment until I had a good answer.

I heard yesterday that we will have them in the first week of April.

I'm sorry it has taken so long to get the replacement rotors, but magnet lead times are really bad right now.

RuthlessLST 03.09.2010 04:36 PM
Where and when can I order a 1717 with the 5mm shaft?

Bondonutz 03.09.2010 05:06 PM
Quote:
Originally Posted by ruthlesslst (Post 354073)
where and when can i order a 1717 with the 5mm shaft?
+1 !

Pdelcast 03.09.2010 05:08 PM
Quote:
Originally Posted by RuthlessLST (Post 354073)
Where and when can I order a 1717 with the 5mm shaft?
We should have 1717 5mm shaft motors in early April.

Thanx!

Urgeoner 03.10.2010 06:58 PM
Okay Patrick, I sure hope this holds true!:whistle::yes:

Bondonutz 03.10.2010 07:01 PM
Quote:
Originally Posted by Pdelcast (Post 354084)
We should have 1717 5mm shaft motors in early April.

Thanx!
Patrick,
Can these be back ordered or reserved assuming you'll get a limited supply ??

nitrostarter 03.10.2010 07:37 PM
Quote:
Originally Posted by Pdelcast (Post 354084)
We should have 1717 5mm shaft motors in early April.

Thanx!

Patrick, whats your comparison on the 1717 and the 1520 as far as power?

I have a 1521/1Y that I'm putting in my LST XXL and was curious if the power difference will be significant enough to notice or make me want to change. I know the 1521 is a a meat truck for power!!

Bondonutz 03.10.2010 07:42 PM
Quote:
Originally Posted by nitrostarter (Post 354260)
Patrick, whats your comparison on the 1717 and the 1520 as far as power?

I have a 1521/1Y that I'm putting in my LST XXL and was curious if the power difference will be significant enough to notice or make me want to change. I know the 1521 is a a meat truck for power!!
Excellent Q, +1

nitrostarter 03.10.2010 08:50 PM
Some charts or graphs are always nice:whistle:

V0RT3X 03.11.2010 10:27 AM
What will happen to the ones with the 6mm shaft at RCM store?

Urgeoner 03.11.2010 06:29 PM
Hey Patrick. I sent you a pm about the 5mm one. I also question the power difference between 1717 1520.


All times are GMT -4. The time now is 05:15 AM.
Page 26 of 32 « First 162425 26 2728 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.