RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Bl Cen matrix build (https://www.rc-monster.com/forum/showthread.php?t=15325)

BL_RV0 01.10.2009 01:20 AM

Quote:

Originally Posted by brushlessboy16 (Post 250758)
Its 3/16 kydex plastic, was maybe 10 bucks for a 24x18 sheet. Its easy to bend the stuff with a plumbers torch and some patience- all the dark marks you see are burn marks :oops:

http://i152.photobucket.com/albums/s...9091914_01.jpg

Cool, thanks.

brushlessboy16 01.10.2009 08:58 PM

Ran the truck today at school(robotics) ran pretty well aside from a few things- the new spur gear is louder then the humongous 66t,My motor mount came loose and almost totaled my pinion(my fault-loctite time). The only real problem was the front walls of both battery trays broke out- they were held in by 2 little m3 coarse screws. both screws pulled out when i came off a jump and landed nose first...perpendicular to the ground.:lol: 2 part epoxy should do a better job no?

The truck turns a hell of alot better with the 0 offset wheels and the weight better distributed.. Now I just need to get some bent tie rod ends to clear the wheels and get my steering throw back

eovnu87435ds 01.10.2009 09:09 PM

ya. we both kinda failed today at school... I slid off a curb i was riding parallel to, and hit the corner of the curb with only the front left arm, and did cartwheels 5 feet in the air, and tumbled all the way into the building 25 ft away. nothing broke that time. then i backed into the curb at a slow slow speed and the front bumper shattered

trev3813 01.10.2009 09:15 PM

Well, i jumped a dirt pile with my revo so there :mdr:


Seriousness, sounds like alot of fun.

brushlessboy16 01.10.2009 09:51 PM

Quote:

Originally Posted by trev3813 (Post 250972)
Well, i jumped a dirt pile with my revo so there :mdr:


Seriousness, sounds like alot of fun.

I jumped my freind dylan.:na:

BL_RV0 01.10.2009 09:59 PM

I waited some more for my nomadio system. Hasn't paid off yet.

brushlessboy16 01.10.2009 10:06 PM

Quote:

Originally Posted by BL_RV0 (Post 250991)
I waited some more for my nomadio system. Hasn't paid off yet.

Im still waiting for my second M8.


Our(mike and I) back up radio is a POS 75mhz fm with some dead rechargable Nicads... it decides when it wants to work and only has about 50 foot range.:no: it sucks

BL_RV0 01.10.2009 10:17 PM

:lol:

JesseV 01.13.2009 03:04 PM

I just realized my matrix is a mess. Hong Nor rear hub carriers, hobao front hub carriers (metal both), hobao rear and center diff, torsen front diff. Other parts are Cen factory race parts. Hmm what next, maybe the Inferno spur? :P

brushlessboy16 01.13.2009 07:31 PM

Quote:

Originally Posted by JesseV (Post 251804)
I just realized my matrix is a mess. Hong Nor rear hub carriers, hobao front hub carriers (metal both), hobao rear and center diff, torsen front diff. Other parts are Cen factory race parts. Hmm what next, maybe the Inferno spur? :P

More voltage:intello:

Takedown 01.13.2009 09:03 PM

Quote:

Originally Posted by brushlessboy16 (Post 251887)
More voltage:intello:

You need another RCM 2s pack ben.:wink:

_paralyzed_ 01.13.2009 10:12 PM

This thread is still going? I stayed out of this thread for accusations of spamming by someone who will remain nameless. (BrushlessBoy16):lol:

JesseV 01.14.2009 08:49 AM

Quote:

Originally Posted by brushlessboy16 (Post 251887)
More voltage:intello:

Well I could use 5s but charging times would increase, and I already charge 1,5 hours these 4s batteries.

50W Imax B5 you see.. Voltage goes up, amps go down.

brushlessboy16 01.14.2009 08:56 AM

Quote:

Originally Posted by JesseV (Post 252028)
Well I could use 5s but charging times would increase, and I already charge 1,5 hours these 4s batteries.

50W Imax B5 you see.. Voltage goes up, amps go down.

I feel your pain. i have the same charger.

Takedown 01.14.2009 05:56 PM

Get a name brand charger that put out the proper wattage.:yes:


All times are GMT -4. The time now is 02:12 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.