Check www.fsracingusa.com for the body's.

Heres an on-road body... http://www.fsracingusa.com/fsclearbody.aspx

Also check www.OVERSIZERC.com

Try the cen locker

thanks, I'll add that to my data base
affordable bodies,
I was just curious on other sources and styles

yep thats cool looking, must be popular, it's out of stock

looks like just truck bodies

does that work ? I cant seem to find one. I also heard Cen is junk. I'll just make one

Still running Locked Front and rear, It's a Blast to drive ! :mdr:

Running gear is double Revo drive Shafts
revo axle shafts
Emaxx centers with Spools

3S lipo

speed currently at 27mph
58 spur 21 p
Tons of power
crazy donuts on street
Awesome J turns -(throttle backwards then turn wheel and slide around forward and go

Upgrades Coming:
Custom Delrin A arm pins

Still trying to decide on battery, 4S , 5S or two 3S lipo ?? Suggestions :rules:
Mamba Max, later on a MGM

Losi aftershock -LST Center diffs, Front with HD Diff case and 7000k oil
Losi aftershock -LST center rear with locker/spool

Integy Revo Rear arms for Front and Rear Uppers
Losi 8ight or Ofna Front shocks

OK, what do I expect with above and with what lipo?


it's battery and motor time

I have read the tutorial but I'm confused what to get ?
Some help please

this Feigao is temporary

How to decide on motor , C amperage and voltage ?

I'm getting a MMM
Want speeds in the 55+ Or 60 but with lots of torque-

how do you figure this stuff ?




Remember this a 8-9 lb 4wd 20" wheelbase car

Sorry I dont know how to import it but there's a thread in brushless titled 'Is there a rule of thumb to work out motor amp draw' or something to that affect. B4maz posted a calc sheet for working out motor and power questions. It might help you, it helped me.

Cen is not junk by any means.

starting to pull my hair
A little help here
Need a battery, doing lots of reading, but there never seems to be enough details, like in the setup thread, lacks aprox speed, tranny setups, amperage.

On the Tutorials by suicideden
1900-2700kv = 4s lipo
1700-2000kv = 5s lipo
1500-1900kv = 6s lipo

So does that mean I cant run 6S on a 2200 ?
can someone point to where you get these Nue motors at ? need to talk to a tech.

Castle said he did not recommend the MM combo with my setup.

I can only buy so much at one time, so battery is next, even though my 2383 Feigao is temp at least I have it.


Also read that "AM radios and BL dont mix" But I have no Problem with my 20yr old Airtronics 27mhz.

You'll need to decide what voltage your going to run then choose a motor with a kv rating to spin 30-35k.

The web page is no longer available so i took a picture of my print out.

Wow thats cool, What does the red mean in your chart? is that optimal


I dont know where to start on what voltage to run, becuase I dont know what motor to run to get the speeds to 60mph.
price wise it looks like one 5S 5000 25C
or Two 3S at 15C each put in Series, would I need 2500's or two 5000's ?

Edit in later today
I guess I'll go with a castle 2200 motor ... so a 4S or 5S, castle tech was telling me, that with my setup a 4s should bring 40-55mph and a 5S 55-60mph , and if it's not hot bump up the gearing.

Hey guys, thanks again on info
I have been grabbing things to sell and put on ebay so I'm buying some 5s Lipos and a MMM
Spoke to Castle, recommended the 2200 motor and 4s for 45mph and 5s for 50+mph

going with Losi aftershock diffs with my own lock/spool, may use gorilla snwatt in front diff

putting in some Losi 2.0 truggy or 8ight front Shocks
and some integy Upper revo arms
also going to find a way to mount some 1/5 wheels

It's getting Exciting :intello:

The castle 2200 motor on 5s lipo runs great in my friend's savage. Plenty of power. He runs a 4900 mah 25c 5s lipo, and it does fine. He is currently geared for about 42mph, but we had it geared for 55 and it did fine for a 5-8min run (had to stop as we were going to break stuff at that speed!).