muggy

1717,MMM,6c 5000mah,beadlocks and badlands

13.2lb i have about 10-12 min run time geared for 50mph

http://img.photobucket.com/albums/v2...y/DSCN1471.jpg

My RCM MBX6T weighs in at 4350 gram (9.59P / 9P and 9.44oz) RTR with:
Turnigy 4S 5A 30C
Neu 1515 1y 2200kv Finned
MMM
Ace DS 1015
Spektrum SR3300T
PL rims with AKA tires

Thought I posted the weight of the D8T already, guess not(oops). So here it is:

D8T is heavy, about 10lbs or a bit more depending on tires
MMM, 1515/2.5D, 6s Neu 4100EP, HS-7955TG, DSM2 rec., transponder.

Xray xt8 08 with:
rcm monster mount
rcm battery holder
1512 3d
MMM
4000mah 4s zippy (30C)
Ace DS 1015 servo
nomadio sensor reciever
losi 1/2 inch offset rims + losi tyres which arent named!

weight: 4200g without body. was lighter rtr than my mates rc8 buggy without a battery- i was so impressed!

My D8T weighs in at 10.4lbs. Not sure how accurate the scale is but that's pretty close to what I think it weighs.

Setup:

Tekin RX8/T8 1700kv
Neu 5s 5000 SP packs (heavy)
7955 servo
Badlands on VTRs (also heavy compared to racing tires)
Mike's conversion with Losi battery tray

Overall a fun setup. I like the truck a lot and doubt I'll change it much. I really like the strength of the components with the exception of the plastic center diff plate, which is getting replaced with one of Mike's D8 plates. If I dropped some of the plastic, the badlands, and went to some lighter batts, I could have it at my normal truggy race weight of about 9.3lbs.

http://img.photobucket.com/albums/v2...r/1501950b.jpg
http://img.photobucket.com/albums/v2...r/0f9d7f78.jpg

Nice - I like it!

Thanks Sower! Here's a short vid:
http://www.youtube.com/watch?v=Vmqn6vUZU-o

Sweet! I like the D8T - looks like a good truck.

My XT8-E 09 weights 4420grams fully rtr.

Tekin RX8/ 2250
RCM conversion
Gens Ace 4s 5000's
AKA Premounts
PL body

Mines strictly a basher and it's fat pig.

With body,5s 40C 3300mah and basher tires 11.4lbs
A lot of extra weight is due to the "tiny" 1520

http://i88.photobucket.com/albums/k1...donutz/024.jpg

It seems to be, I'll keep posting my progress.

RC8T ft CE with Tekno v4 conversion chassie kit + GPM alu rear hubs
Castle 1520 1600kv
MMM esc
5s 5000mah 30c Turnigy

4900gram / 10.8lbs Ready to drive.