RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   HV-maxx (https://www.rc-monster.com/forum/showthread.php?t=775)

Shadow350Z 06.29.2005 03:08 AM

question!!!
i was wondering if the HV-maxx can handle gp3300 7cells...
I think my titans caught on fire is because of my gp3300 7cells

captain harlock 06.29.2005 08:38 AM

There is absolutely no problem in using them with The HV.

Shadow350Z 06.29.2005 04:56 PM

thas good to hear last week when i was running my Maxx
both my titans caught on fire and i think it damaged the EVX too now when i turn on the EVX the red led jus blinks

captain harlock 06.29.2005 07:38 PM

But wait..the HV is running on fire with 2x 7 cells. The 14 cells pack is the limit for both the esc and the motor so just stick to 12 cells and you will be very happy.

Shadow350Z 06.29.2005 08:26 PM

i dont got no dual 6 cells
i only have one pair of 7cell gp3300



one more question
after this HV-maxx ima sve up to get the g2 xchassis and hopefully another HV
how would i put 4 7cell batts into teh chassis?
the batt i bought are already soldered 2together I can unsolder them myself and solder them side by side right?
are the batts still usable if i unsolder em???

how would i fit 2 sidebyside 7cells into one side of the g2 chassis?

RC-Monster Mike 06.29.2005 09:06 PM

You could build two 14 cell packs with the cells, as long as you have a charger that can charge them.

Shadow350Z 06.30.2005 02:24 AM

nope i only have a duratrax Intellipeak twin pulse

will the g3 straps hold down the extra 7cells?

captain harlock 06.30.2005 06:36 PM

Yes they will.

Shadow350Z 06.30.2005 09:41 PM

ok thnx
my plan after the HV-maxx is get the g2 chassis then save up for another HV

Shadow350Z 07.02.2005 04:19 PM

im getting my HV today or 2morrow or monday
and a 12T pinion and 70spur do you guys think it will go fast still with that low of gears??

captain harlock 07.02.2005 05:05 PM

You should not go beyond the recommended gear ratio for this system, but maybe one tooth is possible and no more so there will be no excessive load on the system.

RC-Monster Mike 07.02.2005 05:09 PM

on 14 cells, it will be pretty peppy with that gearing. Low gearing is the way to go with 14 cells on that system.

Shadow350Z 07.02.2005 06:01 PM

ok good hopefully ill get my HV by 2day
ugg had to babysit the nextdoors kids and i dont get no pay

coolhandcountry 07.05.2005 08:17 PM

I tried your plan on the two hv maxx system. It did ok. I am running the g maxx x brace chassis. I took the hvmaxx off. I have it sitting in a box. I run a 7 xl nemisis. It runs circles around the daul hv maxx set up.

Shadow350Z 07.05.2005 11:51 PM

dyou try higher tooth? on pinion and lowest on spur?


All times are GMT -4. The time now is 03:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.