I PM'd you on that nbcazn ;)

OMG! i love burshless, it was the batts! THANKS ALOT COOLHAND! (sarcastic) anyway, i solderd some plugs on the gp3300 i got, put them on and BAM! it wheelied like crazy and had insane speed, it was so fast, that the tape i used to hold down the batts ripped off! lol...i think i'll need aluminum now!!!! I LOVE BL!!!! I LOVEe BL!! YIPEEE!!!! its almost as fast as my rc18t. Ima gear it to 70t, and 19t pinon with 14cells, though they are cool's crappy ones...

Yeah, that was what i was preaching to you about 623 posts back... ;)

70/19 is gonna be to high. PLEASE DONT! we dont wanna here about "i geared to high and fried my 9920"

Pack the batts up and the hv maxx I send the money back to you. with pinion gear.

He is happy with that buy, i'm sure of that Country..

What happened did he burn it up already ?:L: .

lol, i was j/k man! dont take it offensively! Im happy with the hv-maxx. actually, i still havent tried it out yet. I'll try it later on.

okay, maybe the gearing is too high. HOw about 70t, and 17t? 14 cells? Ima try to make the other gp3300 into 7 and 8 cell packs. What if i run 16 cells? I know there'll be too much rpm, but i'll gear it really low. Im hoping for longer runtimes, my 9L only gets 5 minutes on 72/17t setup.

DONT DO IT!!! 9l on 16 cells is alot. 14 max. what gearing are you running now? more cells = lower gearing. so on 14 cells 17 is still probably to hot.

-corey

well, right now im running 12, my temps were 73 degrees for motor, about 81, and 100 for the batts. The motor and esc wasnt hot at all. SO i was thinking i can up the gearing with the 12 cells. I can do 72t/15t for 14 cells. Thats teh lowest setup i can do right now. Why teh batts get so hot? is it cuz they get drained so fast? any way to keep temps down. oh yeah, i also got fans i wanna install but dunno how to. I got a titny fan, 3/4 an inch, and a 1.5 inch fan. I was thinking about ziptieing the small one to the esc and big one to teh motor. Or should i reverse it? where do i hook up the wires to? Should i just attach the fans to teh receiver pack? or something?

15 on 14 cells is probably to high. i would only increase by 1 tooth at a time. as for the fans, get a Y harness like the one that comes on the revos from the factory. connect the to it and plug it into a free channel on your reciever.

-corey

sry, no free space. I could if i want to. SHould i put big can on motor or small on esc? or other way around, cuz the esc ios more importatn then the motor.

You want to use the large one for the esc. But i don't know what fan is capable of moving more air.

http://www.rcpics.net/media.php?sear...earch&limit=10
GOT A VID OF IT!! first oen ever made, i knwo its crappy!

Cool!!!! it is FAST nbc!!! you must be very enthusiastic..... Now.. you arranged a charger allready?

You are wearing a short pants.. If i did that, i would freeze up..

it was reltivly cool that day

Thats pretty quick, Once you get the approiate battery holders you will be happier:)

ya, im scared to jump it or anything, Wait untill i get my stuff to make it 4 wheel drive! then it wotn be able to stay ont eh ground!

Kinda like mine just 1 less cell. It probably is smart not to jump it run it in the rain because the cadboard might rip. And your right it won't stay on the ground, it'l be like superman!

If you want an easy solution for the battery mounts, just buy some pre bent 90 degree aluminum.

cant find any! i went to home depot and lowes, nada! the only bent aluminum they gto was flimsy peices.

Ran my revo agian, got less then 5 minute runs! lol, its really annoying how shotr it is. I think i';ll need a diff motor. SOmething with longer runs. Maybe one of them XL series.

Lowe's should have angled aluminum. There is a small rack with vertically-arranged steel/aluminum bars and angled pieces from 2' up to 8' long. To provide maximum strength, I'd recommend 1/8" thick stock. I got an 8' long (only length with the other dimensions I wanted) X 1/8" thick X 1.5/1.5" wide angled bar. I just cut one edge to 1" and left the other at 1.5". Works well and covers the majority of the battery. If you want, I'll cut you a couple of pieces to the rough length you want and send them to you - you'll have to work on it to get the exact length/width you need. I know I'll never use all of the left over 6.5 feet I have!

lol, chippie iss ending me the batt trys, so all i need is like some small strips, one for teh rollbar, and one for the esc mount, ima see if teh school can do it.

Ok, cool. I just couldn't stand to see cardboard trays anymore! lol, j/k. :)

I GOT IT!! YIPEE!!!! im hoping to install and make the other parts on weds at school!!! I never though chippie would actually send it!!! thanks man!!

Sweet, post some pics of it when you get it installed.

i will, im thinking about how i would setup my reov if i deceide to get an XL motor adn run like 18 cells.

Whats that supposed to mean ?.:L:

Maybe he thought you were lieing?

'
thought u wouldn't send it. and that maybe u wree a liar. Stuff liek this is rare and never happens. IM sry, i look for the worst in people so i wont get dissapointed. RC failures forced me to become liek this....

tells more about you than about others ncabz...

No Worries, we still love you..

maybe that's why you didn't wanted a package for me...

Just goes to show you don't know some of us.

tch tch, the youngsters these days...

Ouch, makes me feel old Daniel..

lol, im thinking about spraypainting ur guy's names on the batt trays to dedicate teh revo! or i could just put rc-monster for every1 in general... maybe mike got some free stickers or something.

I appriciate what ya did hippie, and i'll trust ya from now on. PS, i thought ur name was CHIPPIE till coolhand told me it was hippie. lol

DAFNI & SERUM Your both youngster's compared to me :L: . From now on there only a few people here that i will do special things for. Daf, serum, rc-mike, cool, & a few others not mentioned.

Do you mean me hippie? I see you put cool. Just wanted to make sure so I can feel honored. :D If not me I can't feel honored. :( but i still like you hippie. :D

Yes i mean you :eek: .

not me? i understand, i shoudl be more trustworthy. when u said u'll give free, i found it hard to believe. If its too good to be true, then it probablly is.

PS, to change tranny into 2nd gear, do u push teh metal IN, or OUT?