I just need pics of your setup... The rs pro is a sensored esc mainly, build for racers. I am thinking since reverse isn't allowed in most racing that the esc might not have it? I really don't know what else it could be.

it has reverse, I got yelled at for using it when a marshal didn't see my truck...:whistle:

I know its the CC bec now...:no:

http://s272.photobucket.com/albums/j...zac/hyper%207/

the esc isn't in its final location, nor is the CC bec. a few pics of the "damage":whistle: and this is the first, and last time that my tempo has ever been photographed:whip:

I'm going to get a T maxx RX box to put everything in...

Awesome, I also have a hyper 7 and want to start a conversion. I'll enjoy reading this thread tomorrow.

OP, where did you get that motor mount?

used from brianG

Which one is it? Just the Hyper 7 mount?

It's more helpful to post your pics in the thread so nobody has to navigate around to find it. Just a thought.

edit- I realized your pics are too big. When you upload them limit the file size. Then post them directly in the post. With the pictures you alread have, this is how I would do it.

I'll get to resizing them sometime today.


its a hyper 7/8/st mount, as far as I know, brian would know more...


and to conferm your observations, yes that is duct tape, I ran out of heatshrink...:oops:

I won an auction on ebay that had a 2 speed set for the H7, would it be worth it to install it? the

buggy probably isn't going to see any track time... anyone know the stock tooth counts on it?

i guess the 2 speed is out of the question now, it needs mecanical brakes.

True, you will have to run mech brakes...

what about this slipperential thing majig? how much $$??

what do you guys recommend to attach the esc to the buggy?? :neutral::gasp:

I use this super velcro stuff you can get a menards and radio shack. It is like the non-furry side of regular velcro on both sides. It holds the esc on like no ones business. I would do that and a ziptie if you could.

I got some of that stuff, its clear, right?? I had a problem with it not sticking to the esc and were I want to mount it:grrrrrr:

The stuff is called 3m dual lock. It holds everything for me. You need a screwdriver to get it apart. I have seen it clear... Mine is black. If it doesn't stick to your esc, you can use some ca glue to hold it on. Make sure you're not trying to stick it to regular velcro too.

http://www.indigoshop.co.uk/media/gbu0/cat/duallock.gif

yep thats the stuff I have, I'll have to give it another try

looks like I have no choice now but to buy an RX8http://i272.photobucket.com/albums/j...banghead-1.gifhttp://i272.photobucket.com/albums/j...banghead-1.gifhttp://i272.photobucket.com/albums/j...banghead-1.gifhttp://i272.photobucket.com/albums/j...banghead-1.gifhttp://i272.photobucket.com/albums/j...banghead-1.gif
rolled the buggy, flipped it over, it went 10ft then died, it was at 3leds so it didn't thermal, the BEC still works, but I have no lights, beeps, etc :cry::cry:

it couldn't have happend at a worst time ether... people were just starting to gather around:ha: usualy stuff like this happens after a "hey watch this!!..."


it doesn't have the usual fried elc. smell though

the motor is FS if anyone is interested... the H7 will have to be put on hold for a few weeks:whip:

http://www.rc-monster.com/forum/show...989#post273989

sooo no one wants to buy my motor??:cry: