And a different switch. My switch turned itself off the other day after a jump. I thought the day had finally came as nothing was happening only to realise that the switch turned off

Adding a different switch is easy enough. I like the sealed ones, something like this:

http://rsk.imageg.net/graphics/produ...160406w345.jpg

RadioShack link...

Could you tell me where to get these bomb activating switches, please? :D

Follow Brian's link.:rules:

I have my switch set so its mounted verticaly and the on position is pushed down.It never turns off.

This is funny. And no, I will not buy you a plane ticket to come over to the US...:lol:

At least yoou have a good sense of humor. Seeing where you reside at the moment, a good bomb joke must be hard to come by...

Yeah, maybe if it was the V2 and all faults were fine I would change the switch but doing that will probably void the warranty. Still don't want to take to many chances with the V1 im still running

To everyone asking why castle aren't releasing specific current draw ratings: read this post.

i asked CC about extending the wires on the switch to get it to a more meaningful location. i didn't want to void warranty either. this is what the man wrote:

"As long as you don't solder on the controller itself you're set. You'd
have to splice the wire into the existing wires.

Joe Ford
Product Specialist
Castle Creations"

That's exactly what I did to have my switch inside the RX box :intello:.

http://i256.photobucket.com/albums/h...Picture080.jpg

The switch is between the two screws in front of the gray rx box.