RC-Monster Forums
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Modded Mamba Max Testing!! (https://www.rc-monster.com/forum/showthread.php?t=7656)

lincpimp 01.07.2008 10:27 PM
Sounds good artur, keep us posted! I am still running the modded mm you sent me in my revo, it works well and stays very cool. Startup and overall feel is much improved over the stock mm.

TRAXROB 01.08.2008 01:06 AM
I can't wait for the MMM I have no patience.:lol: But whenever it comes out Ill be sure to grab one.

GriffinRU - I noticed your from MD. What part? I'm in Mount Airy. I work at Northrop Grumman in Sykesville. You sound like you know your stuff. I try to get me EE buddies to get into the RC's but they never seem interested.

suicideneil 01.08.2008 01:25 PM
I think alot of people see RCs as just toys, regardless of price. Perhaps a demo is in order.

GriffinRU 01.09.2008 11:06 AM
Quote:
Originally Posted by TRAXROB (Post 139544)
I can't wait for the MMM I have no patience.:lol: But whenever it comes out Ill be sure to grab one.

GriffinRU - I noticed your from MD. What part? I'm in Mount Airy. I work at Northrop Grumman in Sykesville. You sound like you know your stuff. I try to get me EE buddies to get into the RC's but they never seem interested.
Crofton,
It is hard to match Job and Hobby...

BL_RV0 01.09.2008 11:52 AM
Quote:
Originally Posted by GriffinRU (Post 139820)
It is hard to match Job and Hobby...
unless you work at a hobby shop! :lol:

DrKnow65 01.12.2008 02:55 AM
:party::party::party: Just resurected mustbnitro's dead MM :party::party::party:

Long story short, the solder from one of the caps was touching one of the buss leads. It actually had 12 burnt fet's and 2 that were cracked from taking the heat sink off. It has a few lifted traces and 3 of the copper sleeves that interconnect the pcb were pulled out so it took a little creative soldering.

I didn't keep the mod though, didn't want to spend the time if it wasn't going to work and I'm not taking it apart again to try. So at this point it just has the better caps, diode, and deans wet noodle wire. Think I'll attach a fan and call it good.

GriffinRU 01.12.2008 05:22 PM
Quote:
Originally Posted by DrKnow65 (Post 140575)
:party::party::party: Just resurected mustbnitro's dead MM :party::party::party:

Long story short, the solder from one of the caps was touching one of the buss leads. It actually had 12 burnt fet's and 2 that were cracked from taking the heat sink off. It has a few lifted traces and 3 of the copper sleeves that interconnect the pcb were pulled out so it took a little creative soldering.

I didn't keep the mod though, didn't want to spend the time if it wasn't going to work and I'm not taking it apart again to try. So at this point it just has the better caps, diode, and deans wet noodle wire. Think I'll attach a fan and call it good.
You can do it :rules:
Nowadays broken Mamba's on eBay have some value...:yes:

DrKnow65 01.12.2008 07:17 PM
Fets are hard to change :surprised: I only had to do one in the first MM I modded.

Soon I should have some funds for some more lipos, 4S will happen soon.

After that (5S) is when I convert the hyper7 to brushless.:yipi:

cadima 05.03.2008 01:10 PM
If anyone has a spare brain board or a fried MM with a working brain board, I could use one and will pay fair price. PM me. Thx

brushlessboy16 05.03.2008 08:26 PM
I just ran my Mamba Max on 5s. Had a zippy 4000mah pack, and turnigy 50-55 600kv outrunner

DrKnow65 05.03.2008 09:42 PM
riffenRU has a few, I've got one that had a few traces lifted, but would require a skilled hand to make function again...

How bad is the damage to your brain board?

GriffinRU 05.04.2008 07:43 AM
Quote:
Originally Posted by DrKnow65 (Post 169070)
riffenRU has a few, I've got one that had a few traces lifted, but would require a skilled hand to make function again...

How bad is the damage to your brain board?
:) How do you know that... :)

Quote:
If anyone has a spare brain board or a fried MM with a working brain board, I could use one and will pay fair price. PM me. Thx
Have you acquired what you need?

DrKnow65 05.04.2008 10:38 AM
I heard it from the horses mouth (I'd search for the post where you said it, mabey later today :)

Mabey it's just because you have never dissapointed before, hahahaha

cadima 05.04.2008 02:11 PM
Quote:
Originally Posted by DrKnow65 (Post 169070)
riffenRU has a few, I've got one that had a few traces lifted, but would require a skilled hand to make function again...

How bad is the damage to your brain board?
Well, many of the little circular clamps the board jumpers solder into came out so I can't solder the jumpers in. Had a few traces lift as well so it's beyond my skills at this point.

cadima 05.04.2008 02:15 PM
think Castle would sell the brains seperate? Or, is running to power boards in parallel as straight forward as connecting to boards in parallel?


All times are GMT -4. The time now is 02:21 AM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.