I ran mine with 8000kv motor is was stupid fast

here is the video

http://www.themadbaja.com/forum/view...php?f=53&t=940

I just ordered the new Maxamps 25c 3s 2200 mah lipo for mine today with Deans plugs.

I ordered the 2100 2s that i linked in an earlier post.

They just got mine in today and it is 25c. Cost was $80.

I have the maxamp also.. Just hard to justify $80 for a 2200mah pack.. when I get the trinity 1350 for $30 a piece... not to mention you cant fun these no stop the motor will overheat.. just FYI if you need packs get the trinity best bang for the buck

the maxamps was only $40 its 2100mah instead of 1350mah

That's pretty much how mine looked with the 8750kv motor, once I tried it in the dirt it was pathetic. I couldn't go anywhere because it was so fast I had no traction. So I went back to the stock BL motor, I ordered a 280 heatsink w/ fan from Thetoyz.com for mine. Just waiting for it to get here now.

can you link me to the pack ? when i go on maxamps and look at the 3c 2100 pack its $56 Dealer cost to me..

thanks

I was talking about the 2100 HV 2s NOT 3s, i plan on running mine on a 32x45 1/18th scale track, bluonyx said 3s was silly fast and 2s was better and still plenty fast, so i went with the 2s.

I tried a 2c pack its alot slower with it probally 30 which is still fast with 3c it does 40 on the dot

haha if its faster with a 2c than a brushed mini-lst with stock motors then itll be fast enough for my track.

main reasons i liked this trinity were that it fixed the problems over the Minilst ; steering servo = you can run fullsize with out play, gotta have a tougher drivetrain since it comes running 40 out of the box since i wont be runing it that fast it should hold up fine on 2c forsure, it prolly has better shocks too - the threaded aluminum ones one my mlst2 blew out on the second battery pack, plus with comes with the mamba and a brushless motor, and can hold a decent sized lipo.

I have been pretty impressed with the NOW..