:lol:.

2 packs finished!

http://i206.photobucket.com/albums/b...p/DSCF3133.jpg

The shrink needs a bit more heat, but I leave it like that so when the packs heat up evenly the shrink pulls tight. Plus I am not really fond of heating the packs with the heat gun...

Awesome! 1 down, 1 to go.

I have them seperated and I need to solder the tap wires and the main leads on. I should have them done after work so I will Pm you.

Ok, packs are done, heres a pic of the 4...

http://i206.photobucket.com/albums/b...p/DSCF3134.jpg

Note red cup with brow "mystery" liquid. That is a rather potent crown and coke. Weather sucks right now and the pimp is feeling down, so a little liquor should help...

And for my next trick, I will turn the 8 2s packs shown below into 4 4s packs...

http://i206.photobucket.com/albums/b...p/DSCF3135.jpg

Glad they got there safe. Looking at your work in this thread I am so happy to have you working on those babies.

Isn't that wire on those PQ-5000XQ packs ridiculous!

Very curious to see what is inside those hard case packs...

Thanks so much for the service and take your time.

Wow that's a lot of $ in batts!

I like all these pictures and updates...:yes:

No prob ED. The wires are a bit much...

I ordered some deans 12gauge wire for you, should have that early in the week.

They are cells made in China. Linc just rewired a hard case PQ pack just like the red ones pictured above. Enerland cells, just made in China.

Yep, I just opened up one of the HC lipos and it has made in china stamped on the cells. I will have a look at the soft 5000 packs and see if they are the same cells, I am sure that they are.

This thread is pretty cool!:smile:

Well, regardless of where they were made, they rock:

http://www.youtube.com/watch?v=OY5ehzKkZfA

They are great packs! Nice video and driving!

Linc it looks like you've got some work ahead of you! Hey, what's with the Deans on the 8AWG wire? :lol:

A little update on those 8 2s packs for Electric Dave (and anyone who cares)

I have the 6000 and 5000 soft case cells assembled into 4s packs. All cells are balanced and ready to shrink.

Just have the hard case lipos to do. The 5000 cells in the soft case were identical to the HC ones, BTW.

And the deans plugs on those "jumper cables" is pretty funny. I guess if you really want to push the packs hard the huge wire is necessary, but you would have to use some big (6.5mm) bullets with them... I have run 4s and 6s setups hard, and never had a deans plug get hot or melt...

I just bought a new pair of the 5100 25c hard case lipos from HC... If you happen to be a platinum member they have a killer deal on them right now... worth taking a look...

And in case anyone is interested I do have a pair of 6000 2s 25c polyquest packs (identical to the ones pictured a few posts back) for sale. I ran them in the erevo with the 1515 1.5d and a MMM. Since I sold the truck and motor, I really do not need a 4s setup like this. Maybe 20-25 cycles on them, in perfect shape save for the std rubbed off writing on the label (all pq packs do this) Pm me if interested...

8AWG wire? thats nothing... I occasionally have to solder 6AWG wire... Thats when the mother of all irons gets pulled out. 500W!
http://www.stanleysupplyservices.com...1-130&ref=base

Anyways, I have my puffed RC-Monster packs packed up, and should be postmarked 3/18...

That's when I would use screw terminals!! :lol:

My friend uses something like that when he solderes copper plates together.:lol:

http://www.youtube.com/watch?v=xFXueyluf2Q

And when electric power isn't enough, he uses this -

http://www.youtube.com/watch?v=wktMu...eature=related

Ok Electric Dave, all of your packs are assembled. Just need to shrink them and they can go back to you. I will put some pics up tomorrow after I shrink them up.

Let me say one thing, I really prefer enerland lipos over everything else. They are so easy to work on and the just exude quality... Good stuff.

Got my packs in yesterday. They look great!

You guys got some pics?

Thanks very much for the progress report and the kudos on the Enerland brand. I like to think that you get what you pay for and while they are somewhat premium priced, they have always performed quite well.

Looking forward to the 4s packs!

Hey lincpimp. just wondering if there was any status updates on the packs that i sent you. you remember them right, the ugly ones 2 different 3cell packs with the nasty glue on the end. any luck with them?

Good to hear they arrived. Seems to be taking longer than the 2-3 days from Slidell these days. I guess the PO is slacking up on priority shipments.

Enerland definitely has strict QC on their packs. I have owned packs for just about all of the companies that use enerland cells and have had 1 pack with a bad cell. It was a well used pack, and I do not know if the previous owner balanced it...

I have had some fun trying to get the glue off... One pack is staying in balance well, the other has one bad cell, and it is the middle cell. I will try some low heat on the heat gun to melt the glue, but I may not be able to get it apart... I will keep trying.

thanks for the update. no rush though. i have more than enough projects to keep me busy.

I will take some pics of my various projects and post them up here. Should make everyone feel better about themselves....

I like to start tings, but get bored quickly. It took me a year to convert a lst (only took about 8-10hrs, but I spread it over a year). Once I get moving on a project it usually goes quickly. Except crawlers, they take forever to get just right...

Here is a pic of the packs I made for Electric Dave, in case anyone was interested...

http://i206.photobucket.com/albums/b...p/DSCF3158.jpg

those looks great. to bad you cant turn the packs i sent you into those :) but then again, that would be a real magic trick to get thatdone. i know what you mean about projects, i have a crawler and a mp7.5 on the bench in pieces!

nice lookin batts

Thanks!

If I could change battery ttpes I have a feeling maxamps would be knocking my door down!!!

no doubt sir. an a few other people to boot.
alright sorry for the topic straying...

This is RC-Monster- if we dont go off topic I'd be worried... :mdr:

good to know you guys can be lax about that, some forums ct your fingers off if you get off topic !

Very true Neil, and it is usually my fault that threads go astray...

Yeah, some people have no sense of humor!!!

Subscribed- Linc does great work!:yipi::yes::party::mdr::great::love::party:

Is there any way I could get a label made for my 3s 30c 3200 flightpower? I posted a thread on it... Also could you send me pm with the price to re-build my flightpower linc? I forgot how much it was... I'm just thinking about re-doing it...

ok, a little more info on the pack and problem would be handy...

I don't know if you remember the pack I got from takedown and I was going to finish it myself... It was basically three cells hooked together and I put wires on it. I would want you to take all the wires off and put new leads on with astro taps and deans, then shrink er together and send it back. Let me know if you need any more information. The wiring is in... Rough shape now.:gasp:

Hi Linc, are Neuenergy Packs actually using Enerland cells? Note their capacity numbers are completely different to the ones listed on Enerland's website for their XP XQ cells.