Okay! I just wanted to make sure. :) Would you have a turn to suggest serum. I was thinking about 10 or so.

With a centerdiff? or what gearing ratio and what cell count?

I will most likely run a tranny for now. I was thinking of a center diff. I not sure yet.Gearing is up for grabs. I figured i should be able to run a little higher gearing than with the 9xl. You have more experience than I serum. I am open to suggestions. I just want power. :D

How many cells?

20-24?

I was going to run from 16 and up. The up is un sure of yet. I was thinking that if i go with the 10 and run 16 to 20. If i change the motor around I could pack 30 or so. I may try it on more than 20 if it does good on 20. Have to figure on the kv rating and such.

well, there is some difference between 20 and 30 cells, but in 20/24 cells the 2250/10 or 11 should do (not very much difference in KV.. with 30 cells i would also aim for about the 25-30 k rpm range. Don't boughter the low RPM, you'll get more than enough torque back for it....

What do you think about a 2250 10 turn? Run anywhere from 16 to 24 cells. I think the 2250 will be good for that.

I think that would be perfect.....

You might need to change your range of gears (pinions/spurs) but it sounds like a charming one to me.. Consider a centerdiff, it helps you find the right gearing a bit easier.

Okay! I will check out a center diff. I may need it help it drive better. It drives good now any way.

Centerdiffs are uber..

You lost me serum with that one. What is uber?

Great, fantastic, greater than great..

Center diff would be awesome.. but spent too muchmoney on Tranny and CVD's... :(

Come on.. That's no reason... ;)