will pass on that, with the small spur i would need a 9t pinion to bring speed down to 45-47.... that wouldnt fit either, so i guess in going to make a custom one:yes:

how much pinion-to-spur flex would i be expecting without the mount tied into the CD and what are the effects of this?

So far i have on my list

12x12 .125 kydex sheet

m4 tap, and matching drill bit

90 Degree countersink

Some m4x10 countersunk screws

Some 4x10 button head screws, am i missing anything?

Unless metric are different from SAE, thats actually an 82 degree c'sink. How much do those run BTW. I just get them from work.

all metrics are 90 degree

im ordering all this stuff from McMaster.com



also added some 3/8x3/8 delrin blocks to mount the tray to the chassis, thanks mike :D

Good news, im at school now- just got acces to our cnc end mill :D:D:D

:yes:

so the motor mount will be machined instead of done by hand- maybe some custom odds and ends- we also have a cnc lathe




Cnc machine is:

Denford MicroRouter Compact

http://www.westwirralworks.co.uk/Res...il.asp?MacID=1

Cen was shipped...:yes:

yayyyyyyyy!

Nice build ben, am looking forward to seein how it turns out

Just put the order in for:
Greatplanes 4.0mm tap and drill set
4x8mm countersunk screws
13t pinion
Red Aluminum Servo arm
Some Axial Battery straps
Antenna mount
90 degree countersink


truck should be here tommorow or friday

everything else monday or tuesday

no truck today :no: but i did get a set of Hyper st Mud guards (thank jhautz for inspiration) to keep some of the dirt out. along with a set of new crystals for my radio- brought temps down considerably- now they hover around 120 degrees.. :lol:

Should be their soon...

not today either...

Soon, The wait is part of the glory young grasshopper

and a kick in the face ain't:lol: