RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Brushless (https://www.rc-monster.com/forum/forumdisplay.php?f=12)
-   -   Rustler speed attempt... (https://www.rc-monster.com/forum/showthread.php?t=19042)

What's_nitro? 04.13.2009 07:32 PM

You had a close call with the sidewalk there... It could have been disasterous! That truck is quick for sure, as if we couldn't already tell it was. :smile:

PBO 04.13.2009 10:35 PM

It got really, really close to the gutter...

Part 2

What's_nitro? 04.13.2009 11:00 PM

Aaaaannndddd then it went into the gutter.... :lol: I almost :cry: when I heard the crash! It looked really good flying by the camera. You had a good angle on it.

PBO 06.03.2009 06:19 PM

For the "Rustler" fans, I'll be running again this weekend

I've installed the new version MIP's & will be running 4S2P 6600...everything else is much the same however I'll be advancing the timing a little to see what I can wring out of the TP cells

I will at some stage see how long the MMM will cope with 8S also. Does anyone have any opinions about how long it will last?

What's_nitro? 06.03.2009 08:29 PM

Quote:

Originally Posted by PBO (Post 292685)
I will at some stage see how long the MMM will cope with 8S also. Does anyone have any opinions about how long it will last?

1) Why?
2) Your MMM --> :angel:

PBO 06.03.2009 08:50 PM

Haha good to know I've got an esc angel!!

I've heard/read of others doing short runs on up to 10S without damage to the MMM. I also used my series plug late one night by mistake after a few repairs during a bench test without any problems...I'm always gentle on the bench for obvious reasons

Basically, I'd like to understand what the MMM is capable of running in the "real world"

What's_nitro? 06.03.2009 09:03 PM

Well, in the "real world" it's rated for 6s. I can't understand why you would try to run it 33% over the rated voltage. I take it you will run the same motor? Same gearing? If one of those doesn't change it's gonna be toast. If not when you accelerate, then when you brake. Sorry to sound so "glass half empty" but you're basically testing to see whether you can waste $220. $150 for the ESC and $70 for the replacement. Plus shipping.

PBO 06.03.2009 09:31 PM

You may be right?

Nobody believed I could run stock sliders to 87mph (must admit I surprised myself too), in fact most RC people are skeptical of almost everything until proven wrong. I'm not out to prove anything to anyone or to build a better box but I enjoy the odd careful experiment. If it all goes wrong, well I guess the V2 will end up in the junk box & a V3 will be ordered

What's_nitro? 06.03.2009 09:36 PM

Well then I say good luck to you! Just make sure you get a vid!

lincpimp 06.03.2009 09:43 PM

If/when you cook that MMM, I will give you 20 bucks for it!

PBO 06.03.2009 09:57 PM

Thanks esc angel, video will be done...if & when

Linc you're on for the 20 if it happens!

lincpimp 06.03.2009 10:04 PM

Quote:

Originally Posted by PBO (Post 292727)
Thanks esc angel, video will be done...if & when

Linc you're on for the 20 if it happens!

Ok, And I even throw in another 10 bucks for shipping and some Kleenex to dry your eyes!!!!

Best of luck with the testing!

OZ-RUSTLER 06.04.2009 03:28 AM

What day you going PBO?

PBO 06.04.2009 03:33 AM

Hey OZ, I'm thinking Monday based on the forecast...

Saturday Fine. Mostly sunny.

City: Min: 9 Max: 20
West: Min: 5 Max: 19

Sunday Chance shower.

City: Min: 9 Max: 19
West: Min: 5 Max: 18

Monday Fine.

City: Min: 10 Max: 19
West: Min: 7 Max: 18

No 8S runs though...not just yet!

OZ-RUSTLER 06.04.2009 03:38 AM

Let me know which day and I'll be there.


All times are GMT -4. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.