RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   CORR Trucks - Slash, SCRT10, etc. (https://www.rc-monster.com/forum/forumdisplay.php?f=46)
-   -   Slash 4x4 Thread (https://www.rc-monster.com/forum/showthread.php?t=25761)

skellyo 02.27.2010 08:59 PM

Quote:

Originally Posted by ta_man (Post 352409)
Who sells the hardened steel MOD1 spur? Mike?

Quote:

Originally Posted by Bondonutz (Post 352424)
The Monster has THE BEST hardened gears !

Reading comprehension is key here Bondo...he said spur, not pinion. Mike doesn't sell any steel spurs for the Slash.

Bondonutz 02.27.2010 09:14 PM

Eh, I'm sick. Who cares.

kazuaki 02.27.2010 09:46 PM

Quote:

Originally Posted by ta_man (Post 352409)
Who sells the hardened steel MOD1 spur? Mike?

I'm using mod1 spur gears made for the Tmaxx. They bolt right up to our slipper. The one in the picture is part of a Robinson Racing kit (RRP8644) that includes an 18t clutch bell and 44t spur. The 44t mod1 spur is the absolute largest that will fit. It is just slightly larger than the stock spur gear and is super close to the chassis. A cheaper alternative is a 42t mod1 steel spur that Hot Racing makes (SRVO442). I wanted the largest spur that would fit to allow more room for the big motor, plus I am hoping the RRP gear will hold up better.

phatmonk 02.28.2010 01:42 PM

Can a 100A rated 5000 4s 20c battery run in a lighter vehicle like the 4x4 Slash with a MMM/1512/2D setup.I know CC says 120A setup

kazuaki 03.02.2010 06:51 PM

RPM Arms
 
The RPM arms showed up today...

http://www.nuibe.com/rc/slash4x4/rpm_arms_800.jpg

Haven't had a chance to install them yet, but they loook like they should be nice.

phatmonk 03.02.2010 06:59 PM

Where did you get them?Are they instock somewhere?

kazuaki 03.02.2010 07:16 PM

Quote:

Originally Posted by phatmonk (Post 352899)
Where did you get them?Are they instock somewhere?

They were in stock at http://www.teamgonads.com/. They actually ran out late last week and already got their 2nd shipment yesterday, which is when mine were sent out.

reno911 03.08.2010 02:31 AM

Where can I get a set of these losi 8ight shock plates? Or should I be asking who would like to make me a set? The losi shocks are what I wish to run and this would be a perfect addition to my 4x4.
http://www.nuibe.com/rc/slash4x4/slash_2650.jpg

Bondonutz 03.08.2010 01:50 PM

Quote:

Originally Posted by kazuaki (Post 352904)
They were in stock at http://www.teamgonads.com/. They actually ran out late last week and already got their 2nd shipment yesterday, which is when mine were sent out.

I got the last 2 pair last week, should be here today :party:

MTguy 03.11.2010 07:59 PM

Some great info in this thread guys. Thanks..

Snowman 78 03.12.2010 12:00 PM

I want to run these buggy tires and wheels with 17mm on my slash:
http://cgi.ebay.com/ws/eBayISAPI.dll...fvi%3D1&_rdc=1

Is this what I need?
17mm Wheel Hex Adapters for 12mm Hex
http://www.rc-monster.com/proddetail...od=RCM-17mmHEX

Bondonutz 03.12.2010 04:22 PM

Quote:

Originally Posted by Snowman 78 (Post 354565)
I want to run these buggy tires and wheels with 17mm on my slash:
http://cgi.ebay.com/ws/eBayISAPI.dll...fvi%3D1&_rdc=1

Is this what I need?
17mm Wheel Hex Adapters for 12mm Hex
http://www.rc-monster.com/proddetail...od=RCM-17mmHEX

YUP, your good to go !

kazuaki 03.12.2010 05:49 PM

Slash in the sand
 
So, I'm out in the sand dunes (Glamis, CA) this weekend. Had to snap a few pics of the Slash 4x4. This truck is a blast out here.

http://www.nuibe.com/rc/slash4x4/201...ash_rf_800.jpg

http://www.nuibe.com/rc/slash4x4/201...lash_f_800.jpg

http://www.nuibe.com/rc/slash4x4/201...lash_r_800.jpg

nitrostarter 03.12.2010 06:13 PM

Action shots?

Awesome truck!!!

kazuaki 03.12.2010 06:28 PM

Quote:

Originally Posted by nitrostarter (Post 354635)
Action shots?

I wish...my 6 year old can't take pictures and he sure as hell can't drive.


All times are GMT -4. The time now is 05:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.