Originally Posted by ClodMaxx

thanks for the advice. i'm a noob on this forum, but not a noob to the hobby. i have my share of UE, GA, titanium, lunsford, proline, hitec 5955, spektrum, matched SPC racing cell packs etc. on my truck. i've learned the hard way - long ago - that form does not alway follow function. my only mistake was the hv system - but i'm holding out for the MMM. it may not be a $3000+ setup, but it is far above stock.

i'll leave how my ride 'looks' to the custom airbrushed true fire lid i'll be making for it soon. :027:

Originally Posted by GorillaMaxx360

http://i116.photobucket.com/albums/o...0/P1220004.jpg
http://i116.photobucket.com/albums/o...0/P1220003.jpg
tell you what I have here.
1.) FLM chassis
2.) FLM combo Bulks
3.) FLM bulk braces
4.) FLM shock towers
5.) HB diffs
6.) Punisher turnbuckles
7.) GorillaMaxx skids
8.) GorillaMaxx battery straps
9.) Traxxas big bore shocks
10.) Flextek titanium arms
11.) Quark 125B
12.) Hitec HSC5955 servo
13.) Stormer Hobbies wing Mounts
14.) GS truggy wing
Some things to come

1.) Spektrum DX3.0 radio (getting for 100 bucks-good deal- if not for this deal I would get a nomadio)
2.) G1 single speed conversion
3.) Steel idler
4.) Rc monster heat sink motor
5.) RC monster heat sink esc
6.) Mamba monster maxx motor
7.) Maxamps 8000mah batteries
8.) UE 6mm CVDs

Also from doing this project I have made many mistakes like I have purchased/ or been given the wrong things for my project that I thought would work but they either did not fit or were not up to speed on their quality. These items include Tsais CVDs or Revo $70, MSR5 Integy shocks $120, 17mm Ofna hexes $25, and Revo aluminum Integy knuckles $55 bucks. I know it is said but I have all these items and they all have never been used just sitting around collecting dust that is well over 200 bucks in stuff that I can not use I hope to sell it if not that will be some extras that I can not use, I also have the parts to build 2 E-Maxx stock rollers minus three stets of bulkheads.
these items are just some of the parts i can not use.
http://i116.photobucket.com/albums/o...0/P1010036.jpg

Out of all of this I say I have learned a lot and I thank you guys so much for all your help and I would name some of you guys but there is so many so special thanks for all and if you actually read all of this thanks tell me what you guys think.
THANKS A TON GUYS.:004:

Originally Posted by GorillaMaxx360

I would get UE cvds if they extend them they might be weak, and that will not be good. you can also use sliders just as strong but way cheaper. (but requires some mods) you can get some longer turnbuckles here for front here for rear.