yup, i dont know why but i just like the novak system better, we will see how everything turns out once both our projects are FULLY completed.

for me it will be a while. first pick the parts. then order them after i sell my tmaxx. then order if i couldn't get all them and then build and take pics

ok, tell me when u sell ur e-maxx ill help you pic out some nice stuff

This is what I have decided on and I know I am getting unless someone thinks it is not a good idea. This might take me a while so iam doing it in word and copying and pasting it.
1. Gorilla Maxx G3 Race Suspension-Price: $264.99
2. Gorilla maxx G2 emaxx race chassis/ext. Kit(Traxxas)- Price: $209.99
3. Gorilla Maxx G2 X-Brace Motor Mount for traxxas emaxx- Price: $39.00
4. Gorilla Maxx Aluminum Race Skid Plates for traxxas maxx- Price: $36.00
5. Fastlane Maxx Rear Bulkead, L & R w/ Braces- Price: $37.50
6. Fastlane Maxx Front Bulkead, L & R w/ Braces- Price: $37.50
7. Proline Powerstroke shocks-price: 229.99

thats a good list, i need bulkheads also.

The powerstrokes won't be that much, so you will save a little there. I will try to get thgis stuff into the sotre soon, but if you have an item in mind and don't see it in the store, simply ask. I may have or be able to get it quickly. I have all those items in stock.

Mike, so when will you have those cool tires? i forgot what theyre called.

what else do i need on top of those parts to make it RTR besides motor and controller

what else do i need on top of those parts to make it RTR besides motor and controller

hmmmm. are you going to be using the stock tranny?

I don't have a date for the komodos. i am at the mercy of my distributor! Hopefully soon!

Toby, I forgot to list turnbuckles and turnbuckle ends in the list. Besides that, you will need a transmission, steering linkage, steering servo, servo saver and the radio equipment. That should be about it, besides the batteries, charger and tools to work on the truck.

Yes! Once they come in i will be the first to buy them :)

so what do you think of my parts and what other parts like names and stuff for me?

updated list
This is what I have decided on and I know I am getting unless someone thinks it is not a good idea. This might take me a while so iam doing it in word and copying and pasting it.
1. Gorilla Maxx G3 Race Suspension-Price: $264.99
2. Gorilla maxx G2 emaxx race chassis/ext. Kit(Traxxas)- Price: $209.99
3. Gorilla Maxx G2 X-Brace Motor Mount for traxxas emaxx- Price: $39.00
4. Gorilla Maxx Aluminum Race Skid Plates for traxxas maxx- Price: $36.00
5. Fastlane Maxx Rear Bulkead, L & R w/ Braces- Price: $37.50
6. Fastlane Maxx Front Bulkead, L & R w/ Braces- Price: $37.50
7. Proline Powerstroke shocks-price: 229.99
8. Maxx 2.5 Cvds by RD Logics- Price: $30.00
9. Maximizer 7075 Aluminum diff cups - Maxx trucks- Price: $49.99
10. Integy Super-Duty Type II Steering Block for E/T-Maxx- Price: $29.99
11. Integy Aluminum diff case- Price: $23.99
Super duty turnbuckle set for e maxx/t-maxx (Integy)- Price: $10.99

that sounds ok so far.

Mike, the cvd's i ordered will cover the 4 spots near the wheels, but what should i use for the center ?

Sylvester,
Did you get the extension kit for the chassis? If not, I would recommend it. If you go with a high power set-up, the Unlimited Engineering center shafts will work perfectly (they have a stock size and an extended size - stock size for the stock maxx or g-maxx without the extension, the ext. kit for the g-maxx and extension kit.) They don't ship International, though. Let me know and I will get some for you.

Toby,
Your list is pretty complete. You will also need spider gears for the diffs (need two, as well as two sets of cvds and two sets of knuckles). Then, you need a transmission, some rod ends (for the turnbuckles). Of course, you need a motor/controller, servos and a radio system(transmitter and receiver). I have pretty much all of this stuff, although I haven't gotten the chance to put some of it on the site yet.

post what wouold be best for me please mike

Dear Mike, i think i will stick without the ext kit, but could you get me the stock size center shaft? It would be greatly appreciated.

Consider it done! Actually, I happen to have a set in stock! I try to keep a few of these around for my International customers, because UE doesn't ship International. I pay full retail for them (haven't been approved as a dealer yet for UE), but at least my International customers have an option to get them.

are UE a arms better then GMAXX? and help me out with the rest of the parts please

Dear Mike, Thats awesome! Please hold that 1 set for me , just post it and ill buy it :) Toby Gmaxx all the way brother.

i know. the parts that mike listed are the ones i need

well so far i need tires , rims and center shaft from him, and oh yah, Brushless!!

tires and rims are secong. first are the parts to get this thing actually working

what is the definition of beadlocks? people say they are ogod

The advantage to beadlocks is that you don't need glue for the tires. The bead of the tires is locked to the rim. They look nice and work well, although they are a bit heavier than regular rims.

would you uise them?

Mike - prob not - the weight thing is an issue - but i might be wrong

i cannot decide

thats a tough decision

I don't use the beadlocks (I am a lightweight freak!). The RDLogics aluminum rims, on the other hand, I would consider. They are actually pretty light (considering they are aluminum) and they look sweeeet!

oh the ones for 100$? they do look nice and are aluminum, i might think about it.

ya forget about beadlocks. sorry miek

good shoice toby.

thank you

*choice*

Toby, when are you gonna start buying your things?

in a month but getting it all ready so i know what to order

thats good , i cant wait till my parts arrive, im shivvering mauhhahaha