No...integrated skids, different screws, standard 1" extension.

I'd just get the lower plate with the new X-Braces.

integrated skids?

I doubt that?

how would the CF look like? CF skids?

Directly from Gorillamaxx. And if I'm not mistaken, integral means integrated. :p

I am not too enthusiastic about this feature. I wonder what the CF would look like after a few races..

Does this mean that the skids are directly connected to the chassis?

Sorry but the G2R X-Brace is much in need of improvment.... The current design is not strong in supporting the rear end so it bends upward over time...

sKi

What races?? :032:

LMK and I'll be there!

Yeah, that's the spirit!!!

I'll do some research, so far i only came accross an organized race for 1/5th scales.. One of their members/organizers is rather enthusiastic about brushless cars! (understatement) and wants one too.

I think it's possible (according to him) to go there the day before the 1/5th races and use the track..

Another event here is on a BMX track, not really my bag though.. from my understandings the track uses 1-2cm diameter large rocks.. It's dangerous without wearing protective clothes.. More of a bash than a race.. And i bet if we explore the pit we visitied last year, there will be plenty of room to bash..

So you guys think they are going to be open tomorrow? Im sure looking forward to seeing the new stuff:035:

The time went by really fast. I can't believe it is already tomorrow. I am usually an optimist, so I'll try stay that way, although, I don't think I can, lol. I have a feelign it won't open again. I just just hope it opens now, lol. :005:

Don't worry its open

Holy Crap those price are ridiculously high!!!

They added $100+ to the cost of the G2 chassis and the only differenc I can see is thicker plates and it comes with the extended chassis option.


The single motor mount is cool wiht the ability to lower the motor 15 degrees.... But $39 for a single plate. Thats just stupid.

I for one wont be upgrading anytime soon at those prices.

I did notice the prices, lets hope the price drops soon. I need a G3R for a revo i'm converting

I signed in to say that too..

that's not a normal price for a flat piece of aluminum..

Not to worry, the singlespeed became 74 bucks too.

The most revolutionary parts are the arms. The setscrews are a nice add-on

Does the extended center CV's work with the G3 chassis? Also, the 1" extension, i guess my new rear Gorilla skid is useless?

They still didn't change the braces though, which are in need of being beefed up!

Pretty looking G3.3 arms too :027:

Prob not a basher arm though, i'm sure you can design it just as light and make it have more strength than those...

Well, I don't think i can fit my 2x 5s1p packs on there (a123's), as the motor mount is int he way... i could just get a custom one machined

wow those prices are high I hope mike gets some stuff and gives us the rc-monster discount because his prices on the gorillamaxx stuff is much better than on the gorillamaxx site

This was not worth waiting for. Who closes a website for that long to come up with products that are only slightly different from the ones they had? Can't say that the new layout is an improvement either.


Off-topic:
Aren't there any G2R kits around in the stores? Are people waiting for the
G3R? I know Louis at www.ballistichobbies.com had a the G2R in stock a few days ago.

Those prices are very high. I had to get me a single speed though, I've been waiting too long to get one. Had some extra $$$ sitting on my paypal account anyway.

Actually, that price isn't that high...Come on guys...The extra $100 for for the skidplates, dogbones, extended, thicker chassis, and updated x-braces isn't that bad...

Well, after looking at the prices and crapping myself, I ordered the new G3.3 suspension. The new motor mount looks rather cool, though I prefer my version to be honest.... The new G3 chassis looks identical to the old one too (thicker though), except for the new rear extension that has been altered a little to allow different esc mounting positions. The site layout is pretty cool, but you can tell they still arent properly ready for re-opening yet since there are no spares available, and the Revo stuff isnt for sale yet. Hmmm.......

EDIT: Squee is quite right though, you do get the skids & dogbones included with the chassis this time, so it saves having to order them separatley.

You might want to read my post up. ^^^ You gotta read. It is more than you think for the extra $100.

Well, you do get the extension too, and some new screws, and it is updated (thicker) I suppose, but on the whole it looks near enough the same- you just more/newer parts. I would have liked to have seen a new design, something even more special, rather than something just a bit 'beefed up'. But you know the old saying; if it aint broke, dont fix it!

Yipee - the site works in Safari now!

Squee... You are right. There is more to this update than meets the eye. But i think they are making a mistake by making it an all or nothing deal. The old $198 price tag was alot for most to bite off. It did probably come to $299 by the time you added the extention and the dogbones and the skids, but you had the option of not doing those if you wanted and then adding them later. Now they are forcing folks to drop the whole nut all at once. I think this makes it a much more intimidating upgrade.

The price on that single mount is still stupid high for a siongle plate of aluminum.

the x-braces look the same,and there's no mention of them being stronger.maybe they're slightly thicker? The thicker lower plate would help
them ever so slightly anyway,atleast the lower arms of the x-braces.

the new motor mount and 3.3 suspension look good though.I hope the chassis can bottom out with UE shocks with the new suspension.The new towers look a lot nicer.

A $15 increase in price for the single speed conversion?!? Come on, the only new thing with it is armor plated screws that can be had from hexcrews.com for about $1.50.

Seeing the new prices on this stuff just reinforces the fact I will not even think about building a G3R.

Sweet, the site is open but theres no pictures or info on the revo stuff...:012:
figures

Here are my thoughts. For the extra parts in the package, the extra 100.00 is not much, but what if you don't want or need all that is included? The other thing, the single speed is too pricey IMO, especially with the V1 and V2 out, more for the money there.
The other disappointing factor here is that there are no REAL improvements with the exception of thickness and SLIGHT style change. It would have been nice to see new X-Braces, which would have confirmed the new prices a tad more.

I agree, not worth the wait. The X-Braces badly needed upgrading for us bashers. But, not a single real change. Looks like I will be keeping my FLM chassis.

If you are a basher, then you made the right choice in the beginning at least!

Yea, that does suck for the people that wouldn't want those parts. Personally, I would'nt want the dogbones. I would just use Revo sliders, but thats just me...Even with the Slipperential, just use the shafts Mike has for using the 3.3 sliders with the 1/8th scale diffs. In all honesty, I'm gonna be really pissed if the G3R is $100 more than it used to be. Especially if there isn't some big changes...

Ugh.. and i was gonna start a maxx project.. I think the new g3r chassis will be 400$+ after looking at some of the prices...

I don't think Mike will charge that if he can help it. But honestly, I don't think it will be. Its not gonna be extended, its not like the added cost of dogbones are a problem, and it already comes with skids, so I dunno. Maybe a few bucks more, but if its $100, my Mod discount will come in handy...

Mod discounts arent fair.. Some of us forum members help out alot and we get nothing out of it.. ;)

Then I would get ready for an upset. :(

I agree, but I would think that the discount is not much.

how do I convert to Electric revo...are the, "coming soon" parts...

Thats true, i doubt squee would blab anything if it was a high discount, cause if it is a good amount of cash, im gonna have to open a can of WHOOP AZZ.:005: