D A M M Mmmmm
Took it out for a spin and that's what exactly it did :lol:

I only had the 1/8 auto cross little wheels so it was dificult to handle at 25% throttle :surprised:

I better get the 1/5 wheels on there and let this beast FLY !!

Don't forget the video camera this time.

Haha lol yea , no wont forget, I just went out on the street did some video ,but I could not keep the camera on the car and drive, radio keeps me from using my thumb to steer, so cant drive it one handed with my Airtronics radio

Where do I get one of the voltage stops, my mamba monster does not have a 6s 22 volt setting. ?

The default setting is number 2 which is auto-lipo. It will automatically detect how many cells and cut-off at 3v per cell.

That's on a v3, I don't know if the earlier versions are the same.

ON 6s set the lvc to 19.2v. You should be able to do this with the included pc interface cable and castle link.

Auto is so you can go between 2s and 3s.



Thanks Link, just thought 19.2 was to low since it's a 22.v batt.


Trying to get it setup on radio
The ESC lost the first config for my radio which took forever because I needed a tech to guide me through manual prgramming as he listed from the phone the beeps and told me what to do, but now the tech says it cant be done, my radio has a Brake button and also a Reverse, the CC techs say there is no Brake function that it's a back button, but there is as the tech got me working with my brake So I know it works. Just a matter of doing the same process.

OOPS. Sorry :oops:

I have been working on making wheel adapters to screw onto the 10/32 revo shafts and have a 8mm shaft to hold the 1/5 wheels on, but I decided to go with these,

So I get them on Monday and DRIVE IT !

=========== :mdr: R E V - O S I :mdr: =============
:party: FINISHED !!! :party:

I found some 8mm shaft wheel adaptors that have revo 10/32 thread so I turned them down to take off the extra ridge that was on them and Presto

http://i588.photobucket.com/albums/s...t/TL290075.jpg

http://i588.photobucket.com/albums/s...t/TL290077.jpg
Got the 6s lipo
Mounted the wheels
http://i588.photobucket.com/albums/s...t/RL010081.jpg

http://i588.photobucket.com/albums/s...t/RL300084.jpg

http://i588.photobucket.com/albums/s...t/RL010076.jpg



ALL this and now the Radio wont sync with ESC anymore ! :grrrrrr:
other radio's dont work either. sending it back.
I tried driving it with my DX6 stick radio but the car is too fast to deal with a stick controls. But the car is insanely powerful It burns out at 15 mph for over 10 feet

Been wanting a pistol grip for my Crawler and now this Beast needs a reliable radio so I'm GOING TO ConVerT a Spectrum DX6i into a Pistol grip


I'll post Video

WAY cool conversion. Can't wait to see video. Wheels look great!

This is a certainly a very cool car, I wish I had room for something like this.

Thanks guys :mdr:

still a few areas to redo and extend the chassis sides to keep debris out

It's a dream come true:party:

1. Make a list of stuff you used.
2. Send it to me.
3. ????
4. Profit!!!
Nice conversion!

Very cool man. Hope you get your radio sorted out so you can have some fun. I want one now.