Yeah.. Aren't they too small Ryan?

Are you still able to hit the full steering-angle? I wasn't when i put them on my racer-x

me likey!....a lot!!!

personally, i've gone past the "chrome wheels" look myself hahaha.....is that a stock color or did you paint 'em?

They only come in white and yellow. My guess is he dyed them like you did your arms.

ah...i see....thanks for the insight...

hmm...i wonder if my wheels on my maxx can be dyed?......the more i see that chrome the more i wanna scratch it off!!! hahahaha

I wonder the same about hitting arms. I notice my stocker drags the arms some
with the 3.3 knuckles. It looks good though. I like the looks. What is
the effects of roll over being narrower?

Coolhand, the Walbashes make it 1" narrower, so it would be like a original pre-WideMaxx.

wouldn't it be like running 0 offset wheels, like the stock maxx?

I don't think so since the rims are wider than the stock Maxx rims. So even more offset is placed on the inside.

Hello all. Yes its a bit narrower but still able to get full lock, ive not run them yet, I may not. I still have plenty on my other wheels/tyres, might keep these for show.

I got you squee. It still rubs not on the arms but on the turn buckles. It is at the lock postion though. I still like them though.

hey Candyman....got a Q for you..

on your site you mentioned that you could use 51/10 ratio.....is this applicable only coz your BL is some huge motor of a navy nuclear sub? or will this ratio work with my punny HV on 12 nimh cells? please advise...TIA dude...

anyone else wish to throw in their 2cts as well??? any insight would be appreciated deeply!!!

Depends what you need to gear it at, im usung 12/56 at the moment doubt this will help you though. Do you have a transmission or just a center section like me?

i currently have a emaxx tranny locked in 2nd....with a 66/13, topend is nice but it does run quite warm...

my dom slipper just got shipped in but have yet to pick it up from the LHS..so i am unsure what the spur size is....

as i wont be upgrading my BL system anytime soon, i wouldnt wanna spend all that effort grafting the dom slipper onto my gmaxx only to find that i cant gear down sufficiently....and i cant "up" the tooth count for the spur gear too large as it would hit the x braces on the gmaxx and cause bidding issues with the dogbones to the front and rear diffs as the angle goes steeper as the tooth count goes up.

hence my concerns....

I wouldn't use the hv-maxx on such a direct-drive, unless you are stepping up to the HB diffs with the 43/10 ratio.

Your 66/13 and 2nd gear gives you about a 9 to 1 gearing ratio. the 56/10 slipper/pinion would give you a 5.6 to 1..

Stock diffs are 37/13 and the HB diffs are 43/10, meaning your total gearingratio now would be something like 25 to 1 .With the slipper (56/10) with HB diffs would give you an 24 to 1

with stock diffs and the slipper, that would be like 16 to 1.

My word of advice; if you want awesome runtime and speed from your hv-maxx get a 4S lipo setup! you'll love it.

Post pics when you sort it out. I'm curious to see it.

Thanks!