want a new controler
 

I got question. I see the more cell controllers have a limit on revs. I want to know if someone has a controller with out the low limits. I like to get some rpms out of the motor. The amperage shouldn't have to be that high. Motor is only rated at 74 amps. I like to try some more cells. Have a need for speed. :) LIke to try about 24 cells or so.

;)

i know who got you to this.

the new BK series don't have got the 42k limit. (the new 3695/36120 should do)

that 3695 that a bk? 36 cells should do LOL. The 95 amps should work as well.
Can My main man mike get these? I still waiting on the schulze to fry. It seems to be holding for the moment.

Yeah, Mike can get them..

get a 2250 as well.. (that are the motors which are used to turn the universum) (duall).. ;)

Yeah, Mike can get them..

get a 2250 as well.. (that are the motors which are used to turn the universum) (duall).. ;)

I been looking at them lehners. That are so sweet. Been so tempted to. Get me one of them 2280 and pack about 30 cells on it. I be ready for the big time. :)

Hey mike. What does one of them 3695 or 36120 run? YOu can get one correct.

I think mike is missing this thread serum. He a busy man though. I have to pm him. Find out what they run and I pretty sure he can get them.

Sorry. I didn't see this thread! I can get the 36 cell controllers without the rpm limit(in fact, I just got two for other customers). The 36/95 controller should be about $400. The big Lehner motors(2280 series) are about $475. It would be a couple weeks for the motor, but the controllers are in stock as far as I know.

What is price difference in the 36 95 and 36 120. If not much. I would rather have over kill. That away if i step up on motor i can. I can wait on a bigger motor. Just like to try more cells. I like to see 60s mph. Not sure why just do. I think I need help. :)

LOL. The 36120 would be around $450.

Ok. Let me check the funds. I like to get me one. I want to go fast. The new double extension make me think I can do it. Are they on the your sire mike or should i just pm you.

The controllers are listed. The motors are not. I will work on getting the motors listed as a pre-order item, if possible. You could PM me or, even better, e-mail me when you want to order and I will get them for you.

thanks mike. I wait on motor. I have a runnible motor. How many cells can a pack a 14 l? I think it is like 1700 or so kv. Not sure on rpm limit. Have a 9xl to. It has like 1800 kv. Both should be able to take 20 some cells.

9xl would be a nice choice. 6s or 7s Lipo would be pretty peppy with the 9xl!

Don't have any lipos yet there mike. I don't like the sound of them wanting to catch fire. I may wait until they get better advanced on them. I have a pile of cells them nimhs. Have 48 3000s. Have 36 gp3300 and have 36 gp3700. I should have enough to power it. LOL. JMO

I have question. How does the 36120 be smaller and lighter than the 3695? Is that a miss print mike. 20 grams and 6 mm is a difference.

Misprint indeed. The 3695 is the same size as a warrior. I fixed this misprint!

OKay. Thanks mike. It was confusing me. Again :)

Your planning on using a 2280? i was thinking about getting a 2250, the 2280 sounds tempting though.. They reached 101 km/h (63mph) on 20 cells with that motor and a big ass CEN.46

That does sound tempting. Go up a few more cells. Shot for 70. I don't know if the drive train would take but so much. I upgraded alot. Time would tell.

That 2280 weights a ton though.. That's what's keeping me.. The 2250 seems more interesting It isn't the size of Russia, nor it's weight..

I going to try the 9xl on more cells first. How many is to many? That is the question. I have a 14 L here to. I would like to see what 30 cells on that would do.

I would not push a 9XL with 30 cells. It will peak out to 60000 rpms. (loaded that is) the 14L will reach the 55000 rpms with ease as well.. I recommend getting a higher wind motor if you wish to do so..

You don't know what to expect, my guess is that 24 cells will be a blast allready.. Don't you remember what it was like when you upgraded from 16-18-20 cells?

30 cells is nice to make a flyby with, but to bash, it simple is too much..

I have not tried 20 cells. I don't have the esc for it. It is holding me back some. I am willing to scrafice the 14l in the name of science. I think it will hold. Me and my brother put 18 cells on a 8l. It was nasty little motor. :lol Still running it. Supposed to bash a little today. Have see How it goes.

whick controller for the 22 series? I going with 40 or 50. Not sure which yet. I was leaning towards the 36120. Would that take it?

Yeah, with a low kv rated one, and a high voltage setup the 3695 should be good too

I got mike to orderme up a 36 120 serum. I had the 9920 on order. I have to let you know on the 20 cells or so with the 9xl.

With the 9XL the 9920 is safe allready? or is this a future plan upgrade? i am more curious what the 2250 does!!! should i order one?!?

It is for the future. I have not ordered one of the 2250 yet. Got a nice order in al ready with mike. I have to get that first and work it out from there.

Does BK have anything that can handle 12 Cells LiPo....

I really would rather get a Bk than a schulze 40.160WK....

only thing I hate about the 40.160WK is you have to use more than 10 cells nIMH.... it's also too bad that the 36120/36150 have an rpm limiter...

I thought the new micro controllers didn't have this limit. You talking the 42000 limit. That is what I didn't like either. IT was in another thread around here.

The 3695 can be ordered without the rpm limit, but the 120 amp and above still have the limit. This rpm limit isn't the end of the world, either. With the appropriate motor selection to avoid exceeding this limit, these high cell count controllers are a thing of beauty. I ran a 30/150(36150 now) and it was VERY smooth and controllable.

when do you expect the 36120 to be in mike?

anyday now, i believe.

What happens if you go over the limit or will the controller allow it?

I think it might just make some funny beeps?..

No, the controller simple isn't capable of ginving an higher RPM to the motor, due to the lower working frequency. It simple isn't possible. Nothing happens, it ain't gonna happen.. No beeps, just no > 42000rpm.. (perhaps a few rpm more, but that's it)

I wasn't planning on going over. Just wanted to make sure in case. Thanks.

Cool... Maybe it is better to run lower rpms and more torque... just higher gearing.. everything will stay cool.. :)