wut to replace the stock slipper?
 

as the title says

wut do i replace the stock 70T slipper with?

I recommend the Strobe slipper as a replacement/upgrade. It takes bigger, tougher gears and has the ability to dial in some slip, unlike the stock setup.

thnx Mike
can i get a linky??
to the best and not a wallet burner

http://www.rc-monster.com/proddetail...od=Slipper-Kit

It includes the bearing.

If you go to the strobe. Don't you have to change the pitch to mod 1?

Yeah, that's the reason why Mike reccomends it.. Mod 1 is much stronger than a 32 ptich..

The strength part sounds real good. Just seems the selection of spurs are limited. I still running the 32 pitch for this reason. I have to change up. ONe day.

so means i need to change pinions too?
wut pinions should i use??
that i can get at my LHS also can fit a HV-MAxx

You probably can't get them at your lhs, it are mod 1 pinions.

I ran the 1/8" mod1 pinions from Mike with the 51T Ofna spur on the HV-Maxx. You really need to watch the final gear ratio recommended by Novak. Before replacing the HV-Maxx, I originally geared 1st speed to be in the recommended gear ratio and never used 2nd.

will robinson racing double disc be good replacement??

The robinson does nicely. IT is not the strobe system. It does run the 32 pitch though.

so how doe the robinson work??
does it stil use sliper pegs?

No slipper pegs. It uses disk. Hold alot better than pegs.

The Robinson is a step above the stock setup, but a couple steps below the Strobe. With high power, the Robinson slipper is inconsistant, and the spur gears are rather soft. The Strobe offers more durability, consistency and tuneability.

wut other spurs can i get w/out buying online??

my LHS only has stock and RRP to choose from. Novak recommends RRP, but I never ran it.

maybe ill jus get a robinson racing one since i cant really order anything online

They make two version of the robinson. One is for 72 and 76 teeth. the other is for 66-70. Just to let you know.

im getting 72 and gonna put my pinion up about 3-4t
so gonna be about 15-16t/72t

That is a big step in gearing. Truck to slow. Try it before you swap it. The novak seems to like low gearing. Mine seemed to do well on 12 72. If I didn't run big tires may have helped to. :)

im running right now are
12/70
RRP pinion and a Traxxas Spur
its pretty quik