It's ALIVE!!
 

here a few pic I still don't have my 5s[I[IMG]http://i292.photobucket.com/albums/m...0/IMG_0070.jpg[/IMG]http://i292.photobucket.com/albums/m...0/IMG_0071.jpghttp://i292.photobucket.com/albums/m...0/IMG_0072.jpghttp://i292.photobucket.com/albums/m...0/IMG_0073.jpg

Looks nice, I can bet you a bit anxious to get you 5s in. I've often cursed those lazy government employee for not working on Sunday.

looks very pretty !

Damn that things is huge!

Nice car! Just a question, why do so many people have Feigao motors? I thought NEU's where better?

Neu's sell for about $250 compared to the $70-90 feagaos :intello:.

Nice truck!!!

guy quick ? this truck really seam slow with this 3s pack is something wrong or is it just the pack

Oh lol, thats a huge difference :lol:

Are you kidding me? A 3s lipo pack is no-where near enough voltage to move that truck. Assuming you have an 8XL or 9XL, it will be much much faster on 5s lipo, somewhere in the 40-45mph range if you gear it like-so.

neil I am running a xl 10 hey I know can't show this on traxxas site they will not let me post anything

Looks huge with the F-Truck 4 Door Body

Even better- the 10XL will do very well on 5s lipo.

You cant show non-traxxas vehicles on the traxxas forum; everythime I tried to post pics of my TXT-1 (back in the day), they would delete the pics or my post.

Dude they wont let me post any thing

should I run a 6s neil I was told I would be pushing my luck
I just need POWER

You could run 6s with the 10Xl, just gear down a touch and you'll have more torque than you can use ordinarily. Still, a feigao is no match for a proper powerful motor, like a neu etc.

well 5s is in I have it geared at 48/15 can I do better with gearing I was hoping to put a 20t pinion
maybe 52t spur?
or just run 48/20?

sweet, its looks like alot of fun

5s on 10xl should be great. Gear as low as possible (with in reason of course) at first. Then gear up if everything says nice and cool. I found mine heated up driving off road but was fine on road. Moved the shift point to later and it seems to be fine now off road as well.

well I now can't get this truck to shift to second

I got it shifting no worries

Trucks been running great

Good too hear it, I think I am going to pick up a savage roller. Yours looks really nice. Flm's chassis is really clean.

I have a new problem I have Pro-Line 40 Beadlock with Pro-Line tire when I get up in speed they become very woblely

does any on no how to fix this

Sounds like they are unbalanced. You basically need to add weights or dremel material from the inside of the tires until they spin without wobble; good luck with that is all I can say. My jumbo maxx rubbers are very unbalanced and come unglued from the rims almost every run- just gotta keep gluing them back on....

I cant seam to get this truck to steer strait with out adjusting the steering on my controller. what is the right servo arm I should use? with this Hitec servo

thanks guys

and you didnt have this problem with the other tires/wheels? if not, then it is most likely unbalance tires. maybe try fitting your tires again, the foams may have shifted inside. do you have sloppy steering? make sure all screws are tightened down on the steering assembly. servo saver spring weak? put some toe in on the rear tires. you can try putting some spacers on the front springs to make them stiffer than the rears. check your hindge pins and shock bottom caps.

Am I the only one to notice this, but aren't the wheels mounted facing the wrong direction of rotation?

Thanks Vintage! I did have my tire backwards. Well the steering was not a true problem. I brought my savage in to the shop an ask the. they told me that I will never get the servo to go true 0. We did adjust the sub steering trim and now its prefect.
By the way I have gps this FLM @ 48.2mph geared at 20/52 with my 10xl

so now your trucks tracks straight?

yes it is strait I fix in my fasst controller in the sub trim

how are your temps on everything?

temps are very go my fan never goes on motor high has been 135

Now the spur gear keep getting smokin hot and know it spins loose

does any know why

Tightening up the slipper clutch will fix your problem. :wink:

it keeps spinning loose

I got the spur gear fix
but now I keep chewing up my diff. gear can any one help

It for sale pm for price for roller

Whoa ?

I sure hope it finds a good home.

yes me to

it is very fast