Looking for a muggy roller...
 

Hey guys, you have always helped me find stuff, so here I am again!

Looking for a muggy roller, don't really need a motor mount or battery tray. The chassis does not need to be in good shape, but the front and rear ends and the center driveshafts would have to be good shape...

Or I may be interested in parts...

i c y u pm'e me. LOL

and u will c I pm'ed u back:yes:

and you will see i pm'd pm'd you back. LOL

:whistle:you should convert a monster gt:whistle:

Already done that, way before I came here... Not sure if I want another. Anyway the muggy parts are for a custom chassis project... you will want to see (and own) what I have coming.

Nice! Mine's finally coming together, can't wait to see what you come up with.

You have a muggy?

James i found something for you .

http://www.rctech.net/forum/r-c-item...osi-muggy.html

Thanks Mike, and I sent him a message well before Texas posted....

Yeah right!

I'll send my tanks on a new covert mission to Slidell.

I already have the pics of it and his paypal address.. Muhaahahah

I have a muggy roller, new bearings, rebuilt diffs , fresh legs, no wheels but ill trade it for that airsoft tank

How'd you like it? I want to do a 6x6 MGT that shoots rockets and such for a project X.

Looks like a decent truck, I found the tranny to be a bit on the complex side, but could easily be replaced with an emaxx tranny for simplicity and motor brakes... 6x6 project sonds like fun. I have been meaning to do that with a maxx truck, but wanted to make my own diff case for the double pinion center setup.

I'd probably use a big outrunner or dual KB45's, or 1 HV KB45.

Going hv with a kb45 sounds good. I have 2 xl kb45s and have been wondering what to use them in... I will say that the L can motors can draw some juice, but seem to stay reasonably cool in my gtp. I am sure 1 with 8-10s lipo would be plenty to move a heavy 6x6 truck!

I'm assuming it'll be ~20-22lb because it'll have rockets and such on it. You think the KB45 on 10s will handle it? I'll probably use this one:
http://www.hobbycity.com/hobbycity/s...idProduct=5158
With lutach's 10s ESC... On 10s... (duh) and gear for high 30's. Me and TDC57 will have some fun killing each other at November or December's SoCal bash!

Should run cool at 25k rpm max, and will have tons of torque.