![]() |
MMM Wins first 30min A-main in Houston!
I finally beat the Nitros even with one battery change!:yipi:
http://www.carsports.com/earls18scaleopenrc8.html |
Congratulations man:yipi:
|
congrat!!!!!nice to read that you had smoked the nitro guy's:lol:and that your monster seem to hold up
|
u ran a 30min main on a 6cell 3250mah battery?
how did you do that lol. |
even with one battery change.....that why he could run 30 min.....and on 6 cell your amps draw is better than 4 cell:yes:
|
How many pits did the nitros take? Maybe 3? Did you do this with maxamps packs? If so good job...
|
Yay for Houston, (pfffart) quite a day for you @$%%#*&&^%$, RC wins & beating the crap out of the Chicago Bears..... Guess my dads happy Houston man, maybe a few more game with his season Texan tickets... bastids
|
Congrats bro!
|
Good job! I'm also curios how many stops the nitros made. I'm guessing a couple chanced with 3 and some went safe with 4. From what I've seen they generally pit at about 7 minute intervals. Did you infact do this with MA packs?
|
Yes, I use Maxamps 6s 3250mah batteries. With 6s the current is low and it does not take as much punch. My batteries never get over 100F. I always get a solid 15min race level performance out of this system. I change my batteries every 15min. Keep in mind the heats are only 5min. If you run larger batteries, you are just caring around extra wight. The car actually corners and performs better.
|
Quote:
|
Nice work, and congrats from a fellow Houstonian!
|
very nice. really like your rules as they take into acount what people actually run.
|
Go Houston! I am sure the nitro heads were shocked when your rolling flashlight put it on them!
|
congratulations to you...
|
This is good for electrics! Great job, sparky.
Quote:
|
Congrats. How long is your battery swap? What do you do about the ESC Arming?
|
Quote:
That's why I use a single battery with one velcro strap and my body is also velcroed on the car with no body clips. |
Can you post pics????
|
Quote:
|
Earl, I had no idea you had this thread on here. I was his pitman! :) It was definitely awesome to watch him win against all the other nitros.
|
sweet man!!:yipi::yipi:
ive raced my rustler VXL in a 40 minute 1/8th truck main..i didn't win though...3rd:lol: very good effort, i wonder how many MAH my revo will need for 15 mins on 4s?? shaun |
hey sparky, do you run on a tight track with your rc8? your geared for around 30mph. just wondering, ive got a 3d in my rc8 on 6s at 15/46 and its got tons of bottom end as well as decent top end too. also after your 15 min runs how much are your batteries taking on a charge? thanks in advance
|
Well done Sparky!
|
Quote:
I now have switched to the Losi 1300kv motor with 46/17 or 18 gear. The lower gears help with heat to make the 30min mains. The solder post on the Losi motors are better then loose Neu motor wires. I have damaged the motor wires on 3 Neu motors over the last year. That gets expensive. We will see if I'm still using the Losi motors a year from now? So far I'm really happy with them. My batteries take about 2400mha charge after a hard 15min run. The timer on my radio is set to 15min and I always just stop. This makes my batteries last for a long time and they never get hot, maybe 100F.. |
cool! thanks for the reply! im not in love with the soft drawn wires on the neu's either, but the power they make is worth it to me. when you say damaged your talking vibration=breakage right? just curious, just moved back to so cal from sf so i can actually run my car here now. our layouts are very close on our rc8's and im hoping to do well with it. unfortunately my last race was over a year ago and 1/10 scale 4wd so hopefully i can get some time off to see how bad i am at driving lol
|
| All times are GMT -4. The time now is 05:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.