Trany Gears
 

Hey guys. I see Mike is selling the e-maxx transmission gears.

If I get the single speed conversion and I want to build the trany what parts do I need?


Trying to estimate the cost of a brushless revo :D

well if you run the flm half case or the plastic stock tranny for starts. Going to need the out put and idler shaft to. Going to need the bearings. need 4 on the bottom shaft and 2 for idler gear steel from mike and 2 on input shaft. I don't recall sizes. input shaft to. I can search for bearing sizes if need be.

What gears will I need?

I basically need an entire part # list with prices to see how much it'll cost.

Around 80 dollars or something less.

Here you go:
-FLM HALF CASE $40
-GMAXX SINGLE SPEED CONV 60
-RC-MONSTER IDLER 15
-TRAXXAS OUTPUT SHAFT 7.50
-TRAXXAS INPUT SHAFT 7
-OUT PUT 31T GEAR 3
Thats about everything.

You need the tranny's bearings. Ask Mike about it.

Thank you

Any time, bros.

mike helped me build a single speed tranny from scratch, with mike by your side, anythings possible!

well I'm trying to decide if I want to build an e-revo or just put money into the nitro revo and race it.

If I build the e-revo I'll need everything but the controller and motor and batts and tires and wheels lol

E-REVO E-REVO!! lol

well the problem is my track doesn't have a electric MT class.

And mostly only the pro-series runs over here in oregon so its mostly just nitro :(

That would be a good reason to build a brushless g2r and smoke the pros. Then you be looked up to as a pro killer. :L:

Yeah, sounds cool, Coolhand.:)

I would love to buy i'm worried about the longer 15-30 minute mains and the cost of lipos :W:

You also need a slipper/slipperpads and a spur Bro...

Well this is my experence. On18 nimh gp 3700. I can get 25 - 30 min or run time on a set of batteries. If you got lipo and get a 6s 6400 mah. You should finish the race and run victory laps with time of bashing in parking lot if you choose. While the boys stop to fuel you are putting distance on them. Just a thought. Give you ideas and thoughts. ;)

With BL and driving skills you dont need to put too much distance on them;)

also, with the new 4200 mah cells you should be able to get over 30 minutes with a 9xl motor and have plenty of power to.

or the GP4300's, they look better.

the epic 4200s look alot better than the regular 4200s but remember, looks arent everything. its whats on the inside that counts. :L:

I say build yourslf an e-revo get some lipos like coolhand said then smoke the pros and maybe after seeing your truck beat the nitros other people might get into electric monster trucks and you will then be able to run your truck with other electric mt.
its just a thought :D :D :D :D

I know once I kick there booty racers at my track will. But the proseries runs here and there only nitro.

So looks like I'm going to stay nitro for awhile