New software version posted today...
 

* Added ability to change the 'Auto-Lipo' cutoff voltages
* Added ability to turn off the power-on reminder beep
* Improved low speed operation, detects and escapes cogging better
* Added ability to reverse motor direction by Castle Link software
* Added Mamba Max Pro software
* Bug fix: Rare instance where throttle was applied and controller would stay in idle
* Bug fix: Audible power pulse in transition from throttle to drag brake

Is this for the MMM?

Yup -- all the Mamba and Sidewinder controllers will use this update.

Sweet, I am going to test the low speed control again.

Thanks for the heads up, Patrick.

Awesome, just what many of us have been asking for!

the auto lipo voltage change will be nice. Always like to run things a little higher then the standard 3v per cell.

also being able to turnoff the reminder beep is definitely a welcomed change.

Thanks Pat!

Thanks, it would have taken weeks for me to notice had you not posted this up!

Ah! I can't wait!

Patrick, it says beta, does this mean something could go wrong until its a "final"? I would like the added features, but mine is running just fine on 1.20.

Thanx,
Zack

Nice one, Metal.

s***,, that took me like 3 hours... :lol:You're the best Patrick!::yipi:

You just stick to spud guns... :whistle:

..good job...thanks for the update...was just about to check that too...PSP, iphone and MMM :D Ya gotta love software upgrades :D

Sweet!

Go Patrick. Seems like you guys are going into overdrive with putting out controllers and software.

Does it do anything for brushed control?

Does anyone else have a problem with there MM/MMM where they come to a stop and the ESC will not go into reverse?

MM pro coming soon?? end of summer???

Do you have it set to the reverse lock-out mode? You need a moment of neutral before it will reverse..... :neutral:

Thanks Castle team! I am loving the ability to change motor direction as well as the new auto lipo selections.

Thank you Patrick..... good job

Thanks! Good job on the update, I'm glad you don't put them out all the time though. I hate updating my software and controllers all the time.

I have yet to update them. I have my truggy, a buggy and a rustler to update- two mmm, one mm.

Started but have 11 to update...

Updated my buggy, will try out the new software today with linc!

i wonder if this will help with me trying to keep my front end on the ground ??

Two MMM's updated.. I dont think all the Different parameters need to be on "basic" and "advanced" because they really arent hard things to figure out..

I really like the ability to switch motor direction. Gotta test out the new starting algorithm tonite after my batts charge.

i have a problem...
the old v1.20 starting algorythm was so good...how am i gonna know the difference:rofl:

This is why I like the Castle Controlers,updated features via software FOR FREE!!!!!!!

Indeed. I just updated one of my ESCs and there are some nice features in there. I'm glad they were listening to us when we asked for these (there was a thread a while back about suggestions for future updates)!

I love the new features especially the ability to disable the annoying beep and the smoother start up.

I am really intrigued but the "Data Viewer" software. Does this mean the Mamba Max Pro will have a built in data logger or will there be an external data logger available for the existing Mamba Max and Monster Max ESC?

Thanks for doing exactly what you said you would. That adjustable auto lipo feature is what I've been waiting for. :D

first run with the new soft...less smooth,,or hesitation of the esc on startup,,,and when i climb a hill(little asphalt hill) the esc seem not understand that he will need more power at the trottle and beging to cog or hesitate...with the 1.20 software more smoother and i can climb the same hill and no cogging or hesitation the revo goes very slowly... stop and reclimb without this little issue...

my set-up

e-revo
18/68
6 cell lipo
3pm fasst
lpr tire
mmmv3-lowest timing-punch control 40% start power=low

this set-up was for my 2 test...soft 1.21 and 1.20

e-mike, bump the timing up. The Y turn motors love higher timing settings.

I just ran the new software with Linc and I freaked out at first. I grabbed the wrong pack and it was hitting the LVC. I swapped a pack out and everything was nice and smooth and good to go.
I got back home and tried some slow speed stuff, performed better than before thats for sure!

Good job guys.

I too would like some more info on this. Sounds really sweet. :intello:

i know that:yes: but why with the 1.20 soft run flawlessly at lowest timing and aven't a good result with the 1.21 ..also lowest timing????

lowest timing =less hot..no?

i will try today at low and normal....

Haven't tried the new sw yet, just loaded it p last night, but I noticed I had a Grapher program with it whats that all about?

I went to update my Castle ESCs and it only shows the V1.20 which I already have for the firmware and my Castle Link is V3.12. Is there a new Castle Link version I need to install?