What BL motor for 20 cells and 9920
 

I want speed and power for my emaxx.

A 10xl or 11xl would be pretty good

Dito. Expect long long runtimes and plently of power!

10xl or 11xl. I would go 11xl since you are on the escs maximum capacity.

People have run 9XL with 18cells on the 7020, and the controller easily handled the amps. You'll have no problem with either the 10XL or 11XL on 20cells.

Go to this thread and read!! Got My New Setup Running!!! by sluggie

what thread dooley?

Been eating the wrong mushrooms again..?

lol. I think he meant the thread titled "Got my new set up running" started by sluggie :027:

he was saying go to "got my new setup running!!!" not, saying that he got his running...

anyway here is a link to the thread he is talking about(i think) http://www.rc-monster.com/forum/showthread.php?t=2354

ever considered changing your avatar to a more relaxing one squee? It makes me want to punch his face...

Yea I ment the thread is called "got my new set up running" and it was started by sluggie.:005: LOL Yea I just picked a freash batch and they are a little strong:confused:

Hey has anyone used the " castle creations 125 amp" esc on a MT yet??

The 8xl + 9920 gives a ton of power on 20 cells. Probably more than most will ever need. but you will have to build your truck to take the power and not skimp on anything......as I found.....diff.... LOL I get great run time to boot. 15-20 mins running real hard. Would probably run longer if I took it easy but whats the fun in that??? I would reccomend using an extended chassis to help control the wheelies as a wheelie bar alone will not do it. (I just ordered the extended Gorilla Maxx for mine) 8xl on 20 cells will flip the truck right over the wheelie bar with 18/51 gears and 1/8 diffs at 2/3 trigger pull. I think 18 cells would be better for this motor for drivability. If you have your heart set on using 20 cells then 10xl might be the better one to use to keep it controlable. My opinion might change once I change my chassis and diffs. I will let you all know if the control issue is resovled with the longer chassis.

What motor will give me the most speed? Should i pick a differant esc to handle 20 cells?

an 8xl will give you really good speed but you might also want to look into getting a lehner although they do cost more. You could also go with a 12020 controller and it would hold the motor better but its up to you.

I want insane power! :) I have all UE parts if they can't take it nothing will.

I don't want to burn up the esc and motor though. Don't a 11xl have less torque than a 8xl on 20 cells?

if you want insane power the possibilities are endless and the amount of money you wish to spend is the only limitation

actually the more voltage the lower the gearing so the less torque although there are many factors. the 11xl on 20 cells would be INSANE!

8xl + 9920 + 20cells = INSANE POWER

Well why stop at 20 cells. If you want insane power 10s lipo 2280 10t motor 36150 esc center diff or slipper and hope it don't get away from you. It is insane. then again it you pack about 24 or so cells on a 12 xl you get longer run time and speed.