6x6 Nemesis
 

Well I had a hard time keeping the front end down so instead of a wheelie bar I added a second set of rear tires:intello:
More pics to come.

some more
 

some more

Wowzer!! Very interesting!! How did you fab up the middle diff case?

The Nemesis diff cases are aluminum and split right down the middle just use 2 pinion sides and a little grinding on the case to make it all line up. The chassis extensions are made out of 4mm 7076 T6 aluminum Still have to build the top brace. Wheel base is 24"

Is that the natural split in the case of did you have to cut it in the middle? I'm not familiar with the Nemisis specifics.

Off topic: what kind of dog in your avatar?

They come split just use 2 cases to make one.

I missed your second question. the dog is a shih tzu normally there about 12 pounds but he is like the increadable hulk of his kind he's 23 pounds and not fat at all . His name is Teddy and he never met someone he doesn't like

Cool, I did a 6x6 maxx and a 6x6 lst a while back. Looks like that nemesis diff case is alot easier to rework than the maxx and lst cases. I ran the mess out of my maxx, never got the lst powered... Maybe one day.

The Virgin Mary?? Or are we talking about Allah's mom?

almost there
 

Here are a few more, should be done this weekend

Do you think the Nemesis diffs would fit in a set of Maxx bulkheads?

Don't know , I have a set of Maxx bulkheads I will take some measurements and let you know

They likely will, might need shims on the case like the lst diff does.

I've always wanted to do an 8X8 Maxx, I'll have to check on these Nemesis diffs.


Linc- you still have the 6x6?

Yes, still have the 6x6 maxx. I have a set of al bulks, from new era, that I need to mod to accept the rear chassis. Basically using a rear bulk, and altering where the bumper stands mount to look just like the area of the bulk where the chassis plate bolts. I now have a mini mill, so I can weld them up, and miching them to shape, thread the holes, etc.

I would also like to make an al pass thru diff case. It may be easier to buy regular al cases, and cut them in half and weld them up. Need to find diff cases made out of good material. Hopefully the fastlane diff cases will work. Or I may just go with lst diffs in the maxx. They are stronger.

Got it running
 

Got it running today, not to bad need to loctite stuff. has a tight turning radius. Need to loc the center diff even with 130,000 wt oil in a ofna spider diff it still unloads the diff and spins the front wheels but no more wheelies :lol:
Weighs in at 20 pounds with 5000 6S lipo more to come this will make a nice weapons platform for a remote paintball gun.:intello:

Pretty cool !

Kyosho makes a 500,000 wt fluid.

Shiz hot! I like it lots:yes: but where's the video?:whistle:

Working on some videos, Pulled the whole thing apart to locktite and fix little issues. Will get some soon.

Some updates
 

Got it running pretty well, I'm using a monster pirate HD diff with a 63t spur gear and a 9 tooth pinion gear. Welded together 2 rollcages to make one because I couldn't find a body with the proper wheel base. With a 24" wheelbase and being now 23lbs it may be bigger than some 1/5 cars. Next is the paint ball gun mount:lol: Mobile weapons platform:diablo: