The making of my Race bred Revo
 

Hi guys getting excited about this here are some of the stuff i just ordered from Mike
1. http://www.rc-monster.com/proddetail...EMBLIES&cat=43
2.http://www.rc-monster.com/proddetail...NT3108S&cat=44
3.http://www.rc-monster.com/proddetail...TKR1009&cat=44
cannot down load my other pics saying that it is already in the forum well here is the link http://www.rc-monster.com/forum/show...?t=5255&page=2
any comments and suggestions will be appreciated and just waiting for the slipperential and 1/8 diffs to be available

Have fun

Should be a hoot to race!

Id email mike and ask for the best estimate on when the parts will be available.

that's great let us know for any new updates

If you want, i can email mike for you and give you an approximate date.
Let me know.

It should turn out awesome. Have fun with it once finsihed. :dft003:

thanks guys i will update this every now and then with pics. are these items
http://www.rc-monster.com/proddetail...=RE035s&cat=44
http://www.rc-monster.com/proddetail...NT3148S&cat=44
will be good for handling brushless power and good for racing?I just dont like re-building diffs often,If my budget will not be enough buying the 1/8 diffs but definitely will be getting the slipperential

The diff case is good, but the integy cup is crap. Try the flm cups for the revo, they will last quite a good bit.

Update
 

Hi guys just finish installing my Tekno wheelbase and Tekno wing kit,and also my Integy steering kit here are the pics:

that's one sexy servo saver!

Yeah Serum. Now put a de-anod PL arm into it!

LOL! mine is still having all te blue you can imagine.. geee. and i had the deanodize reputation back in the days.. LOL

Nice! Those Tekno arms looks pretty good!

Thanks,do i need to take off the rear bumper since i already have the wing,is proline high downforce wing would be the best bet for racing?

No need for the bumpers if you are racing. I highly doubt you would notice anything in the high downforce wing..

Ooh... I really like. :004:

Nice like the wing keep us updated

I would get the High Downforce wing for sure. From what I here, they actually help.

Here is an update of my E revo

looks nice.

thank you,I ordered some hop ups and more to come

Looking very good. Should turn out to be an awesome racer.

Thanks still waitng for the slipperential to be available,any suggestions for diff oil front and back as a starting point? I ordered aluminum diff cups and aluminum diff house.I'm thinking of getting this http://www2.towerhobbies.com/cgi-bin...?&I=LXMWJ9&P=7 Is this worth the money?

Looks good! I would highly reccomend the RR diff set, they are alot smoother than the stockers.

New pics for the updates
 

Enjoy,It is almost done

Here's some more pics,Iwll be using max amps 6s lipos ,3s on each side

last pics:027:

Nice! quick tip though. you might want to change those wheels because the power of 6s and brushless might just shread the hexes inside the rim or totally destroy the spokes. Jut a suggestion

you are right,I will be using 23mm wheels and tires,just waiting for my wheels to arrive,thanks

Nice man! Why the big blue front bumper..?

It suits the theme of the body.

Thats very nice. With the tekno arms it makes it look extended. Mistaken it for rpm at first.

Wowzers.... thats nice work there man. I know its a sin to ask, but how much did all that cost?

I had plans to build a G2R too, but after doing my sums it was just too much, and it seemed just too 'new' a concept for new to take in *bangs head against wall*. Bah, Im happy with the G2 though.

It costs $1,000.00 plus all other equipment it will be $1800.00 or more, I already have some of the other equipment plus I sold a lot of my rc stuffs to fund this project.Here is my Wanderer 1390 rpm/volt brushless motor with my MGM 24 160 controller and my new Futaba 3PM 2.4 ghz FASST built in transmitter.My rc monster heat sink is on it's way

Wow, it has turned out just incredable. Great job with it and good luck during your racing season.

Hmm, not as expensive as I thought..... unless someone brings out something even more revolutionary I may have to build one too; in a few years time that is.

here it is i will give you the upgrades,the only thing left is the 5.5mm bullet connectors to the XL motor thanks for all your inputs.

Looks great! Should be a blast to drive!

Definately looks awesome. It should rip on the track. :027:

Have fun with it.